Anyone use the "Biondo" Line Lock from Summit??
Thread Starter
Team Owner
Joined: Feb 1999
Posts: 34,455
Likes: 665
From: Republic of Texas
Anyone use the "Biondo" Line Lock from Summit??
http://store.summitracing.com/defaul...th&part=sbr-ll
It's fairly cheap, $39.95 lus the switch and light is $15. Together it's still $40 CHEAPER than the Summit brand, TCI, or Hrst. It's rated at 3,000psi, the same as the more expensive brands. Anone ever use this itiem?
Thanks :confused:
It's fairly cheap, $39.95 lus the switch and light is $15. Together it's still $40 CHEAPER than the Summit brand, TCI, or Hrst. It's rated at 3,000psi, the same as the more expensive brands. Anone ever use this itiem?
Thanks :confused:
Melting Slicks
Joined: May 2000
Posts: 2,125
Likes: 9
From: Crescent City, CA
Re: Anyone use the "Biondo" Line Lock from Summit?? (Corey 68)
I read somewhere (Hot Rod or Super Chevy), that they were as good as any other line lock.
I would buy one if I was looking. I have a Hurst that I just rebuilt, it cost $30 for the rebuilt kit alone.
Just my opinion.
Terry
I would buy one if I was looking. I have a Hurst that I just rebuilt, it cost $30 for the rebuilt kit alone.
Just my opinion.
Terry
Melting Slicks
Joined: May 2000
Posts: 2,125
Likes: 9
From: Crescent City, CA
Re: Anyone use the "Biondo" Line Lock from Summit?? (Corey 68)
I don't know if you could use one enough to wear it out. Mine had been sitting on the shelf since 97' and I was worried the rubber dried out.
Again, if I was buying I'd buy Biondo.
Terry
Again, if I was buying I'd buy Biondo.
Terry
