Engine rebuild update
Thread Starter
Pro
Joined: May 2003
Posts: 579
Likes: 0
From: Cocoa Beach FL
Engine rebuild update
Whelp, I'm off to put in another 10-14 hours. This Saturday is the final prep day and next Saturday it should be done. I finally have all the parts - including one (blower pulley spacer) I had a friend "fabricate" at his work. Last Saturday I had someone come by and weld all the weak places (like the control arm welds). Today it’s time to bolt the new clutch and rebuilt tranny to the fire breathing rebuilt 400 (30 over). Also I’m going to prime the oil pump today to see the lovely sight of oil rushing through the engine. Maybe even set it all back into the car - if all goes well. More to come later..
[Modified by Let 'er eat!, 8:55 AM 1/10/2004]
[Modified by Let 'er eat!, 8:55 AM 1/10/2004]
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Re: Engine rebuild update (Let 'er eat!)
At least you have some warm weather to work with. Keep up the good work. Can't wait to hear how this bad boy is gonna run. Should be a screamer.
Melting Slicks
Joined: Dec 2000
Posts: 2,041
Likes: 0
From: Wichita, KS
Re: Engine rebuild update (Let 'er eat!)
Makes me wish that I was your local tire dealer :jester
Good luck getting it together. Take your time and make sure that it's all right the first time.
Good luck getting it together. Take your time and make sure that it's all right the first time.
