Can someone Desktop Dyno this for me??? please???
Thread Starter
Racer
Joined: Jul 2001
Posts: 341
Likes: 0
From: macon, ga
Can someone Desktop Dyno this for me??? please???
I really want to find out the horse power and torque of my car is, but I cant find any one with a dyno around here. Could one of you guys or gals please help me. I think I have listed every thing but I'm not for sure.
BLOCK:
454 cid
bore =4.250"
stroke =4.000"
compression = 9 to 1
CAM:
melling 22302
advertised camshaft specs
intake duration: 290 lift:
exhaust duration: 290 lift:
degree .050 dur int. 230
degree .05 dur. exh. 230
inch valve lift int. .513
inch valve lift exh. .513
degrees lobe cntr int 107
degree lobe cnt exh. 111
lobe separation 107/111 deg.
duration at .05"
intake 210
exhaust 216
lobe lift
intake .281
exhaust .282
ROCKER ARM ARTIO: 1.7
HEADS:
gm #3909802
oval port, closed
101 cc
INTAKE:
gm# 3947801
CARB:
edelbrock #1910 850 cfm vac. secondaries
EXHAUST:
hooker sidepipes w/ glass packs
3.70 gears and stock th350 transmission
BLOCK:
454 cid
bore =4.250"
stroke =4.000"
compression = 9 to 1
CAM:
melling 22302
advertised camshaft specs
intake duration: 290 lift:
exhaust duration: 290 lift:
degree .050 dur int. 230
degree .05 dur. exh. 230
inch valve lift int. .513
inch valve lift exh. .513
degrees lobe cntr int 107
degree lobe cnt exh. 111
lobe separation 107/111 deg.
duration at .05"
intake 210
exhaust 216
lobe lift
intake .281
exhaust .282
ROCKER ARM ARTIO: 1.7
HEADS:
gm #3909802
oval port, closed
101 cc
INTAKE:
gm# 3947801
CARB:
edelbrock #1910 850 cfm vac. secondaries
EXHAUST:
hooker sidepipes w/ glass packs
3.70 gears and stock th350 transmission
Advanced
Joined: Aug 2000
Posts: 85
Likes: 0
From: Michigan
Re: Can someone Desktop Dyno this for me??? please??? (ykp53)
You've got mail - I sent you a screen dump from desktop dyno..... my first time using it and I had to make a couple of guesses. Let me know what I guessed wrong on and I'll give it another shot.
:seeya
k-
:seeya
k-
Thread Starter
Racer
Joined: Jul 2001
Posts: 341
Likes: 0
From: macon, ga
Re: Can someone Desktop Dyno this for me??? please??? (kristen)
thanks for the help, and i dont to be a pest but can you try to resend it this address ykpowers@yahoo.com i think that email listed in my profile has been closed for almost 2 years now.
