roller rockers-rocker stud
Thread Starter
Advanced
Joined: Aug 2002
Posts: 63
Likes: 0
From: des moines iowa
roller rockers-rocker stud
i am changing from comp cams magnum roller tip rockers to full roller rockers..do i need to change rocker arm studs?..i have standard screw in studs now..
Thread Starter
Advanced
Joined: Aug 2002
Posts: 63
Likes: 0
From: des moines iowa
Re: roller rockers-rocker stud (gkull)
gkull--you do mean the hole where the stud goes up thru?? old debate but would you go from 1.6 to 1.5 ratio?? i got a 248 degree duration cam at .525 lift..showing signs of pushrod wear at point of pushrod coming thru the hole in the head thanks
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
Re: roller rockers-rocker stud (hotbrakesracing)
It looks like you are running the same cam I have in mine. I have the Comp Roller tips on mine and have no problems. Are you running guide plates with your setup? If you are are you running hardened pushrods?
Race Director
Joined: Mar 2001
Posts: 11,322
Likes: 1
From: Living in the Hartland
Re: roller rockers-rocker stud (hotbrakesracing)
What is the lift your springs are rated for? With the 1.6 rollers you are looking at .560 lift.
[Modified by Fevre, 7:37 AM 2/22/2004]
[Modified by Fevre, 7:37 AM 2/22/2004]
