Lower Ball joint bump stop?
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 1,160
Likes: 3
From: Greensboro NC
Lower Ball joint bump stop?
Which way is the bump stop supposed to point on replacement ball joints on the lower control arm. Forward (front of car) or toward the rear?
[Modified by micks69, 8:38 PM 2/22/2004]
[Modified by micks69, 8:38 PM 2/22/2004]
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
Re: Lower Ball joint bump stop? (micks69)
Towards the front. The stud or the thick bolt head goes towards the front. Look at the back of the lower A arm and you will find a welded on stop.
The stud goes to the front.
The stud goes to the front.
