Vaccum Gauge Hook Up
Le Mans Master
Joined: Feb 1999
Posts: 6,807
Likes: 0
From: Hoosier
Cruise-In III Veteran
Re: Vaccum Gauge Hook Up (Tom Johnson)
There should be a vacuum "tree" on the manifold between the carb and distributor. Disconnect one line, unless there is a plugged port on the tree, and connect the gauge. :cheers:
Le Mans Master
Joined: Oct 2002
Posts: 7,098
Likes: 378
From: Las Vegas - Just stop perpetuating myths please.
Re: Vaccum Gauge Hook Up (AlwaysWave)
:iagree: You want manifold vacuum. That big hose in back of carb on base plate is manifold vac too. If you care to lift off the carb and look you can normaly see which line at the base plate takes suction off the manifold. :yesnod:
[Modified by cardo0, 10:44 PM 2/23/2004]
[Modified by cardo0, 10:44 PM 2/23/2004]
