How do I know which Edelbrock I have?
Thread Starter
Race Director
Joined: Mar 2001
Posts: 11,601
Likes: 0
From: San Francisco CA
St. Jude Donor '07
How do I know which Edelbrock I have?
I have this Edelbrock that pik (aka Andy) sent to me and I'm trying to track down a rebuild kit. I'm looking at summit's website and there seems to be only two options: square bore and q-jet. How can I make sure this is the right one for the carb that I have?
Thread Starter
Race Director
Joined: Mar 2001
Posts: 11,601
Likes: 0
From: San Francisco CA
St. Jude Donor '07
Re: How do I know which Edelbrock I have? (patsnitrovette)
The number on it is 1405 1054. Does that mean this is it?
600 cfm Carburetors
Manual Choke
Recommended for most Performer applications and small cubic-inch Torker II applications. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with the following jets, rods and springs: Metering Jets: Primary .100, Secondary .095; Metering Rods: .070 x .047. Step-Up Spring: orange (5" Hg). Use our Carb Stud Kits if needed, see installation items.
600 cfm, square-flange, manual choke #1405*
Replacement Main body only for #1405 (reconditioned) #9921*
Replacement Top only for #1405 (reconditioned) #9927*
600 cfm Carburetors
Manual Choke
Recommended for most Performer applications and small cubic-inch Torker II applications. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with the following jets, rods and springs: Metering Jets: Primary .100, Secondary .095; Metering Rods: .070 x .047. Step-Up Spring: orange (5" Hg). Use our Carb Stud Kits if needed, see installation items.
600 cfm, square-flange, manual choke #1405*
Replacement Main body only for #1405 (reconditioned) #9921*
Replacement Top only for #1405 (reconditioned) #9927*
