Bracket Paint
Thread Starter
Instructor
Joined: Mar 2002
Posts: 140
Likes: 1
From: east hampton ct
Bracket Paint
While the engine is out of my car I am going to paint all brackets, pulleys,power steering pump and fan. What is the best paint for this application. The paint will be applied with a spray gun not a can. I am concerned with the paint chipping when the brackets are bolted on or the accessories adjusted. Is a regular automotive single stage urethane enamal ok for this application. Any suggestions
Racer
Joined: Jan 2004
Posts: 340
Likes: 1
From: St. Clair Shores Michigan
Re: Bracket Paint (mvftw)
If you opt not to powder coat use a washer where the bolt head rests.
or use the paint VERY thin and put a dash of greese in this area prior to installing to help keep the paint from mushing out under the torque of the bolts.
or use the paint VERY thin and put a dash of greese in this area prior to installing to help keep the paint from mushing out under the torque of the bolts.
