Yes...Another "I HATE CUSTOMAUTO SOUND" Thread!
#21
Advanced
Member Since: Feb 2004
Location: Elverson pa
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (theandies)
Yes - these things are utter crap - I still won't buy anything from Corvette Central after they sold me one of these POS and wouldn't take it back.
And saying "Corvette" on the front is real cool - until the cheap sticker falls off and you have a hole in your crappy radio.
And saying "Corvette" on the front is real cool - until the cheap sticker falls off and you have a hole in your crappy radio.
#22
Le Mans Master
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (Rbbmoose427)
Good old Spark-O-Matic. "You can tell by the static that I got a Spark-O-Matic". Thanks for the memories. :)
#23
Instructor
Member Since: Oct 2003
Location: McKinney TX
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (ry)
You could always get the new consoles that have the DIN hole already cut into it. I replaced mine with a JVC standard DIN because mine was already cut up. I think the pre-cut ones run about $85(?) or so.
where did you see those????
where did you see those????
You can buy just the bezel and cut yours, or buy the pre-cut guage panel/bezel
[Modified by Thumper76, 2:17 PM 4/5/2004]
#24
Burning Brakes
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (markdtn)
I just finished wiring in my adapter for my pioneer cd unit , while I was in there I wired in an fm modulator for my XM radio receiver :party:
#25
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (Fred D. Zwiger)
RADIO restorations, FM stereo conversions, 180 watts, 1946-1975 solid state vibrators; look for me at Spring Carlisle F115-117. Mike Hagan, Antique Radio Repair, 235 Glouster Rd, Fairless Hills, PA 19030; 215-547-7145.
#26
Le Mans Master
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (vvv90)
I've been using a Kenwood modified by CAS and been very happy with it. It's their house brand that is a poor performer.....
#27
Melting Slicks
Re: Yes...Another "I HATE CUSTOMAUTO SOUND" Thread! (Corvette ED)
What does it cost for a Mike Hagen conversion? I have a Custom Auto Sound Schitt System and I hate it. No radio reception, no base ...POS!
:U
:U