Would I be "Bubba" if...
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,242
Likes: 0
From: Lexington, North Carolina
Would I be "Bubba" if...
...I drilled and tapped holes in my frame to mount my side pipes? :confused:
Perhaps somebody with the Hooker Side pipes could post pictures of how and where they mount to the car?
Thanks!
:cheers:
Perhaps somebody with the Hooker Side pipes could post pictures of how and where they mount to the car?
Thanks!
:cheers:
Melting Slicks
Joined: May 2004
Posts: 2,743
Likes: 844
From: Gulf of America
2023 C7 of the Year Finalist - Unmodified
2018 C3 of Year Finalist
Re: Would I be "Bubba" if... (JohnS_77)
John, you should have gotten "T" headed bolts with the sidepipes. The head or "T" goes into the slots in the side of the frame. The bolts attach to the tabs on the side of the sidepipes. You can then attach the rubber isolators which will keep them from rattling and from transmitting noise into the interior. Did you get the sidepipes used? Charles
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 3,242
Likes: 0
From: Lexington, North Carolina
Re: Would I be "Bubba" if... (Mako72)
John, you should have gotten "T" headed bolts with the sidepipes. The head or "T" goes into the slots in the side of the frame. The bolts attach to the tabs on the side of the sidepipes. You can then attach the rubber isolators which will keep them from rattling and from transmitting noise into the interior. Did you get the sidepipes used? Charles
Racer
Joined: May 2002
Posts: 325
Likes: 0
From: Feenix Az
Re: Would I be "Bubba" if... (JohnS_77)
[QUOTE]...I drilled and tapped holes in my frame to mount my side pipes? [
QUOTE]
If you also drilled holes in the pipes and held them on with bailing wire you would get my vote for Bubba. :jester
Dane
[Modified by Enad, 6:42 PM 5/20/2004]
QUOTE]
If you also drilled holes in the pipes and held them on with bailing wire you would get my vote for Bubba. :jester
Dane
[Modified by Enad, 6:42 PM 5/20/2004]
Melting Slicks
Joined: May 2004
Posts: 2,743
Likes: 844
From: Gulf of America
2023 C7 of the Year Finalist - Unmodified
2018 C3 of Year Finalist
Re: Would I be "Bubba" if... (JohnS_77)
10-4 John. Saw the name Hooker mentioned and thought that was what you were running. Charles
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski