Vinyl paint spider webbing?
Thread Starter
Racer
Joined: Nov 2002
Posts: 364
Likes: 0
From: Potomac MD
Vinyl paint spider webbing?
Bought some vinyl paint from CC and it spider webs like crazy (overspray), am I doing something wrong? Spraying it at around 25 psi, just painting small parts now scared to start on dash. :confused:
[Modified by Skyhigh82, 3:20 PM 5/29/2004]
[Modified by Skyhigh82, 3:20 PM 5/29/2004]
Le Mans Master
Joined: Apr 2001
Posts: 5,000
Likes: 1
From: Minneapolis, Mn USA
Re: Vinyl paint spider webbing? (Skyhigh82)
I used the SEM and Plastikote spray can vinyl paint on my dash, door panels and all other various trim pieces (seats were done with Molecubond vinyl dye). Cleaned parts first with Dawn dish soap, and then a quick wipe with Xylol / Xylene solvent to pull up any remaining dirt-grease.
Went from Tan to Black with no spider webbing and the look came out beautiful. I did 3 normal to slightly thin coats. Less hassle with the spray can IMHO.
Try to avoid painting on high humidity days, that can cause finish problems.
Brent...
[Modified by MN-Brent, 10:42 AM 5/30/2004]
Went from Tan to Black with no spider webbing and the look came out beautiful. I did 3 normal to slightly thin coats. Less hassle with the spray can IMHO.
Try to avoid painting on high humidity days, that can cause finish problems.
Brent...
[Modified by MN-Brent, 10:42 AM 5/30/2004]
