Holding the back window in
Thread Starter
Instructor
Joined: Jun 2004
Posts: 169
Likes: 0
From: Arlington Texas
Holding the back window in
I just got a '69 BB T-Top car and I let the back window come out and I can not for the life of me figure out how to get it to go back into the car and stay tight in the seal? It has an aluminum frame that holds the glass and 2 small nipples on the bottom that go into the body of the car but I can't figure how to get the thing in there tight. Do the two silver clips at the top hold it in? If they are suppose to then they are way to loose to do the job so I may have to rig it to hold..........Thanks sorry but I am a vette rookie 
Pro
Joined: Dec 2000
Posts: 531
Likes: 0
Re: Holding the back window in (brianlewis60)
Brian - They are adjustable. Under the trim there are slots under the screws. You could try that first. If that doesn't work and you want a cheap fix, you could cut some small rubber pads to glue to the "silver clips" where it contacts the window. Kind of a rubber shim. I just converted my 73 to one of these removeable windows and it's great.
Team Owner
Joined: Dec 1999
Posts: 26,555
Likes: 257
From: Florida
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor '03 thru '26
Re: Holding the back window in (Laguna70)
Yup...the two clips at the top are supposed to keep it in place
Mine are very strong/tight. Sounds as if you need a little rebuilt in that area. Good luck with it. BTW, I leave the window out all of the time. 
Melting Slicks
Joined: Apr 2001
Posts: 2,119
Likes: 213
From: Pittsburgh PA
Re: Holding the back window in (OHSIXX)
Mine are very tight as well. I didn't know they were adjustable. Maybe I need to back them off.
The bottom points should curve back toward the seats...in case you have it in backwards.
The bottom points should curve back toward the seats...in case you have it in backwards.
