ColdHeat Tool?
Thread Starter
"Rodstoration &am p;quot; In Progres
Joined: Jun 2004
Posts: 1,397
Likes: 1
From: Frisco TX
ColdHeat Tool?
I've got a lot of work to do with rewiring and soldering. Just saw a commercial for this new portable soldering tool called "coldheat". If it really works, it would make all soldering jobs a lot easier!
Anyone have one? What do you think?
Anyone have one? What do you think?
Team Owner
Joined: Sep 2003
Posts: 88,393
Likes: 2
From: eville in
Originally Posted by 80TexasC3
I've got a lot of work to do with rewiring and soldering. Just saw a commercial for this new portable soldering tool called "coldheat". If it really works, it would make all soldering jobs a lot easier!
Anyone have one? What do you think?
Anyone have one? What do you think?
girlfreind wants to get me one.... I'm ???? myself
Race Director
Joined: Apr 2000
Posts: 17,649
Likes: 189
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
I would not trust a portable soldering iron that runs off a small battery, nothing worse than a soldering iron that doesn't solder properly. I have the Weller Portasol it is self contained and portable and it melts solder
http://www.divineimages.com/prod/it1...ERING/TOOL.htm
http://www.divineimages.com/prod/it1...ERING/TOOL.htm
Team Owner
Joined: Sep 2003
Posts: 88,393
Likes: 2
From: eville in
Originally Posted by MotorHead
I would not trust a portable soldering iron that runs off a small battery, nothing worse than a soldering iron that doesn't solder properly. I have the Weller Portasol it is self contained and portable and it melts solder
http://www.divineimages.com/prod/it1...ERING/TOOL.htm
http://www.divineimages.com/prod/it1...ERING/TOOL.htm
but have you seen the ad. ? looks like on 14/16 gauge it maywork
the shield looks like it may get in the way for some thingsto me Even if it does what it say's
Race Director
Joined: Apr 2000
Posts: 17,649
Likes: 189
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
I have not seen the ad but simple physics tells me there is something wrong here. I did see a small battery, 1 AA ? or 2. In order to solder properly you have to heat the metal ( wire or whatever ) to be soldered up to 600 - 700 degs F, this takes energy and a couple of batteries ain't going to fair to well in this application.
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
Actually I should be telling you to buy it and tell me how it works I am usually the sucker that gets these things first
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
Actually I should be telling you to buy it and tell me how it works I am usually the sucker that gets these things first
Last edited by MotorHead; Jul 12, 2004 at 08:17 PM.
Team Owner
Joined: Sep 2003
Posts: 88,393
Likes: 2
From: eville in
Originally Posted by MotorHead
I have not seen the ad but simple physics tells me there is something wrong here. I did see a small battery, 1 AA ? or 2. In order to solder properly you have to heat the metal ( wire or whatever ) to be soldered up to 600 - 700 degs F, this takes engergy and a couple of batteries ain't going to fair to well in this application.
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
I think (????) it said 800 deg. 
but if it's light gaugewire it "may" work ...???
Team Owner
Joined: May 2001
Posts: 29,745
Likes: 3
From: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Originally Posted by MotorHead
I have not seen the ad but simple physics tells me there is something wrong here. I did see a small battery, 1 AA ? or 2. In order to solder properly you have to heat the metal ( wire or whatever ) to be soldered up to 600 - 700 degs F, this takes energy and a couple of batteries ain't going to fair to well in this application.
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
Actually I should be telling you to buy it and tell me how it works I am usually the sucker that gets these things first
I could be way off base here but I have had a few soldering irons in my hands that did not work worth a crap and it is very fusterating waiting a half an hour for something to heat up.
Only trying to help here and maybe save you a few bucks.
Actually I should be telling you to buy it and tell me how it works I am usually the sucker that gets these things first
https://www.asseenontvnetwork.com/vc...ldheat/115261/
Race Director
Joined: Apr 2000
Posts: 17,649
Likes: 189
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
I just saw the commercial and it brings back memories of Popiels(sp?) Pocket Fisherman anyone seen anybody using one of those today ?
For $20 more get the Portasol it is a professional tool and it works good
For $20 more get the Portasol it is a professional tool and it works good
Last edited by MotorHead; Jul 12, 2004 at 08:50 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Instructor
Joined: Apr 2000
Posts: 118
Likes: 0
From: Inver Grove Heights MN
Cold Soldering Tool
I was in Dallas last week and saw the TV ad for this item. I was ready to order it on the spot. But, I had my son (an engineer) pull up the website for the company and we read all the facts on it. It works by "arcing" a current through a slot in the tip when the part to be soldered completes the circuit by touching both sides of the tip. BTW they sell a couple of additional tips for small and large work at an additional $9.95 each. If you are just tinning wire, it would be great, but there were several warnings from reviewers that you could easily overheat a printed circuit board if you didn't have the experience to do it right. I'm not saying it isn't a good tool, just that you should be careful if you're not experienced at electronic soldering. Check out the website - its interesting. Just Google for cold solder tool.
Race Director
Joined: Apr 2000
Posts: 17,649
Likes: 189
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
Whoa if that thing is using current to solder you can't go near a circuit board or any electronic device, that leaves as mentioned above tinning wire and costume jewelry repair
Le Mans Master
Joined: Apr 2001
Posts: 5,941
Likes: 281
From: Was New Orleans but swam to Baton Rouge LA
Cruise-In IX Veteran
Originally Posted by Easy Rider
I was in Dallas last week and saw the TV ad for this item. I was ready to order it on the spot. But, I had my son (an engineer) pull up the website for the company and we read all the facts on it. It works by "arcing" a current through a slot in the tip when the part to be soldered completes the circuit by touching both sides of the tip. BTW they sell a couple of additional tips for small and large work at an additional $9.95 each. If you are just tinning wire, it would be great, but there were several warnings from reviewers that you could easily overheat a printed circuit board if you didn't have the experience to do it right. I'm not saying it isn't a good tool, just that you should be careful if you're not experienced at electronic soldering. Check out the website - its interesting. Just Google for cold solder tool.