Rocker Channel Repair
Safety Car
Joined: Jul 2002
Posts: 4,269
Likes: 3
From: St. Charles IL
Cruise-In 5-6-7-8-9-11-12 Veteran
A CI-6 Car Show Winner
I blocked it up under the storage compartments and the firewall on jack stands. You will want to get it up about 2 feet or so, you will be spending a great deal of time under there. Leave the radiator support in as well and provide some support under that too. I also had to fabricate new seat belt reinforcements on both sides (the ones that are welded to the rocker channels). Do a search for redwingvette, he has a web page with photo's of the entire process.
Safety Car
Joined: Aug 2001
Posts: 3,686
Likes: 202
From: Waterford Mi
I biult up some bucks out of 2X4's to fit the floor space under the seat area. Then I used a saw horse under the storage area. Then I used a saw horse to support the nose. Check my web site for more.
Thread Starter
Pro
Joined: Nov 2000
Posts: 594
Likes: 0
From: Tucson AZ
Thanks guys 
I was planning on supporting the nose at the radiator support and in the rear at the #4 mounts but I was unsure if the floorboards would take the weight. It looks like they will and that sounds like a plan
Craig
I was planning on supporting the nose at the radiator support and in the rear at the #4 mounts but I was unsure if the floorboards would take the weight. It looks like they will and that sounds like a plan
Craig
