Fuel Pump update
Thread Starter
Race Director
Joined: Jul 2002
Posts: 13,858
Likes: 0
From: A 12/8 man in a 4/4 world
Fuel Pump update
Fuel pump is on! and working great!
now I have to adjust the float and needle assembly.
too much fuel now!
i used a little grease on the rod then slipped it in.
also used some gasket sealent and tacked on the gaskets.
Things are starting to look up
now, I get to remove the air horn and primary needles again!
[sarcasm] Woo Hoo! [/sarcasm]
now I have to adjust the float and needle assembly.
too much fuel now!
i used a little grease on the rod then slipped it in.
also used some gasket sealent and tacked on the gaskets.
Things are starting to look up
now, I get to remove the air horn and primary needles again!
[sarcasm] Woo Hoo! [/sarcasm]
