Parking brake consol question
#1
Racer
Thread Starter
Member Since: Jul 2004
Location: Oh Lord, Stuck in Lodi again.
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Parking brake consol question
How do you get the flipping thing off???
I can't get that little nut off inside the consol, am I missing something simple???
I can't get that little nut off inside the consol, am I missing something simple???
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,470 Likes
on
1,249 Posts
Cruise-In II Veteran
Not sure what "little nut" you refer too, but there is a through bolt coming from the rear storage compartment securing the e-brake console. Reach it by removing the glove box.
#3
Race Director
That thing is a beotch!!! Just wait till you go to put it back in. I can't remeber the exact size but I wound up using a 1/4" drive ratchet to get at mine with a couple of extensions. Most of the time once removed, the bolt in the back never gets put back. I wound up using a dremel and opening up the surrounding metal so I could get at the bolt a little easier. This may be what is holding you back too.