When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Spec sheet for 1970 Vettes from AIM.
There's always been a lot of discussion about ride height and cutting coils. Someone always says to consult the AIM. Well a lot of guys don't have an AIM and probably won't buy one.
So I scanned my 1970 sheet for anyone to use and print. These are the stock specs and will show the different areas used to measure ride height, including what I always reference---fender lip height. That would be measurement "P"and "R" in the drawing. I would think that this sheet would be universal for all C3's. If not, I'm sure someone will correct me.
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Originally Posted by lostpatrolman
What section did you find those specs in? I looked a few times in my 69 AIM and I couldnt find it.
I found that sheet at the very front...about 8 pages in. That book is like a jig-saw puzzle. It takes me forever to find anything. Much easier to ask a question here.