Hood Alignment Blocks
10-08-2004, 10:22 PM
#2
Melting Slicks
Member Since: May 2000
Location: Crescent City, CA
Posts: 2,125
Likes: 0
Received 6 Likes
on
5 Posts
Barry
Not sure about 81, but earlier were glued to channel and cut to the correct height.
Not all hoods needed the same height adjustment or in the same place.
Hope this is what you are after.
Terry
Not sure about 81, but earlier were glued to channel and cut to the correct height.
Not all hoods needed the same height adjustment or in the same place.
Hope this is what you are after.
Terry