Rotors C3
Thread Starter
Race Director
Joined: May 2004
Posts: 11,920
Likes: 2
Rotors C3
Damn, only twenty minutes left...they will prbably list again.
What do you think of this full set of rotors?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
What do you think of this full set of rotors?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
Thread Starter
Race Director
Joined: May 2004
Posts: 11,920
Likes: 2
Race Director
Joined: May 2003
Posts: 11,814
Likes: 9
From: Science Bitch! Mississauga, Ontario
Canadian Events Coordinator
Originally Posted by Summerfun
OH YEAH! I'd bid on something that lists '83 Vettes!!!
Drifting
Joined: Mar 2003
Posts: 1,608
Likes: 3
From: Canberra AUSTRALIA
St. Jude Donor '05-'06
Originally Posted by Summerfun
Damn, only twenty minutes left...they will prbably list again.
What do you think of this full set of rotors?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
What do you think of this full set of rotors?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33564
My dad always told me to never skimp on tires and brakes.
Do you really want the cheapest brakes you can find on a high performance car?
You can get good rotors for $60-$100. Just shop around.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
You can get good rotors for less than that.
rockauto has Raybestos (all I use in all my cars).
stock type rotor (PGPlus) is twenty something each
drilled and slotted (Brutestop) is 52 each
... and they don't list a Corvette in the 1983 section.
rockauto has Raybestos (all I use in all my cars).
stock type rotor (PGPlus) is twenty something each
drilled and slotted (Brutestop) is 52 each
... and they don't list a Corvette in the 1983 section.
Le Mans Master
Joined: Oct 2004
Posts: 5,269
Likes: 54
From: Orlando Florida
St. Jude Donor '05
Their feedback is only 44 but 100% positive, they have these rotors for my Camaro for $179 F+R ... I might buy from them.....
The AutoZone rotors that I installed on my Z28 are probably also made in China but better than the cheap warping rotors that Chevy installed...
The AutoZone rotors that I installed on my Z28 are probably also made in China but better than the cheap warping rotors that Chevy installed...
Melting Slicks
Joined: Jan 2004
Posts: 2,672
Likes: 1
From: New Cumberland PA
Originally Posted by Big Fish
They are probably Chinese made. Looks like the warranty will get you a replacement set of the same junk.
I know it is risky, but I don't know for sure if the more expensive rotors are going to be any better than these. From what I have read the Chinese steel is better than what it was in the past decades.
Last edited by mandm1200; Nov 5, 2004 at 02:44 PM.
Team Owner
Joined: Jun 2004
Posts: 20,216
Likes: 4
From: Smile, it's just the internet.
The steel can be better, but if the casting sucks it won't matter. I bought a set of chinese rotors for my Lincoln. They lasted (count'em) ONE DAY before two of the four were warped and visibly cracked. I'm still trying to get my money back and they left me negative feedback for complaining. The expensive ones I replaced them with (Brembo) are still going strong.
I would run away screaming.
Just my opinion...
I would run away screaming.
Just my opinion...
Last edited by CGGorman; Nov 5, 2004 at 02:51 PM.
