69 power steering control valve play......
Thread Starter
Instructor
Joined: Jun 2004
Posts: 220
Likes: 0
69 power steering control valve play......
Just installed an Eckler's rebuilt control valve. While moving the steering wheel back and forth the ballstud moves laterally in the control valve body. Is this normal ? Does the ball seat spring keep everything tight while driving ? I can't road test , currently no engine in the car. I can't find any mention of this in the GM chassis overhaul manual.
Team Owner
Joined: Jul 2004
Posts: 40,412
Likes: 792
From: Redondo Beach, California
With no hydraulic pressure, the ball stud will move back and forth. When hydraulic pressure is available, you won't be able to see much/no movement of the ball stud itself. When it moves say to the left, it diverts hydraulic oil flow to the power ram, and the power ram moves to restore the ball stud to it's neutral position. The power ram operates to maintain the ball stud in it's straight up position. That's how the power steering works,
Drifting
Joined: Sep 2000
Posts: 1,985
Likes: 78
From: SoCal.
Also, be careful on start up -DO NOT start the car with your arm through the steering wheel. Many valves are not centered during build and the wheel will snap your arm off with the first application of hydraulic pressure.
Read the directions for centering the valve body.
Read the directions for centering the valve body.
