Fiero seats
Thread Starter
Racer
Joined: May 2004
Posts: 294
Likes: 0
From: Jacksonville FL
Mission Complete!!!!
I finally did it. With a little inspiration from den(thevetteman)78 and some self motivation its done!
What the seat looked like before:
Here is the finished product! Hope you like!
What the seat looked like before:
Here is the finished product! Hope you like!
Last edited by Fireslayer26; Jan 13, 2005 at 01:41 PM.
Race Director
Joined: Feb 1999
Posts: 16,978
Likes: 7
From: In Dreams There Is Truth Ohio
Originally Posted by Cali,68,L-79
Sorry, this site is temporarily unavailable!
The web site you are trying to access has exceeded its allocated data transfer. Visit our help area for more information.
The web site you are trying to access has exceeded its allocated data transfer. Visit our help area for more information.
sitie no workie
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: May 2004
Posts: 294
Likes: 0
From: Jacksonville FL
Thanks for the comments everyone! I am very happy with them. The guy who upholstered them is going to make a black and red shift boot to match the seats with the left over material.
Melting Slicks
Joined: Apr 1999
Posts: 2,010
Likes: 3
From: Moon Twp. PA USA
Originally Posted by Fireslayer26
I finally did it. With a little inspiration from den(thevetteman)78 and some self motivation its done!
What the seat looked like before:
Here is the finished product! Hope you like!
What the seat looked like before:
Here is the finished product! Hope you like!
A while back I tried to use Fiero seats and found that, when folded forward, they hit the top windshield frame, limiting the space available to slide the T-Tops or what ever, into the storage area. If yours fold down to at least the dash, I would be interested in knowing how you mounted them.
Burning Brakes
Joined: Oct 2004
Posts: 1,038
Likes: 0
From: Grants Pass Oregon
Seats
Has anyone noticed any other seats that fit well in a C3 corvette? Or any modifications you can make to the seat tracks in an early C3 to lower the seats. Or has any one ever repaired a rip in a leather seat? Are the floor boards in an early C3 fiberglass? or Metal?
Just curious.........................Chris
Just curious.........................Chris
Last edited by codestar7; Jan 14, 2005 at 12:11 AM. Reason: Forgot something
Advanced
Joined: Jan 2005
Posts: 89
Likes: 0
Originally Posted by codestar7
Has anyone noticed any other seats that fit well in a C3 corvette? Or any modifications you can make to the seat tracks in an early C3 to lower the seats. Or has any one ever repaired a rip in a leather seat? Are the floor boards in an early C3 fiberglass? or Metal?
Just curious.........................Chris
Just curious.........................Chris
Someone correct me if I am wrong, but C3s floors are fiberglass up until 1974? then metal from 75- on, or is it 1976 is the first year for metal? I have a 72 and it is feberglass and a 76 that is metal. Remy
Thread Starter
Racer
Joined: May 2004
Posts: 294
Likes: 0
From: Jacksonville FL
Originally Posted by glen242
I would like to see a picture of the Fiero seats actually mounted in the car.
A while back I tried to use Fiero seats and found that, when folded forward, they hit the top windshield frame, limiting the space available to slide the T-Tops or what ever, into the storage area. If yours fold down to at least the dash, I would be interested in knowing how you mounted them.
A while back I tried to use Fiero seats and found that, when folded forward, they hit the top windshield frame, limiting the space available to slide the T-Tops or what ever, into the storage area. If yours fold down to at least the dash, I would be interested in knowing how you mounted them.
