FS: 82 Corvette
05-02-2017, 10:21 AM
#1
Instructor
Thread Starter
82 Corvette
82 Corvette for sale. Always garaged with cover and very will cared for.
406 CI SBC. 10.5/1+ compression built at local machine shop in winter of 2015 and dyno'd at 451 hp upon completion. I do have the dyno disc.
Forged scat rotating assembly and pistons.
Competition 270/276 cam with scorpion 1.6/1.7 roller rockers.
AFR 210 heads with VIC Jr intake.
Holley "ultra" 750 carb with 5" K&N filter,
MSD HEI distributor with 8.5 mm wires.
9 qt racing oil pan.
Be Cool aluminum radiator with electric fan.
Hooker headers with side pipes (a little rewrap needed on drivers side)
Duntov 3.54 differential.
700 R4 transmission with shift kit.
B&M ratchet shifter (new).
Hood mounted guages (narrow band air/fuel mixture, vacuum, oil pressure, temp).
Steeroids - rack and pinion conversion kit uses 86 corvette steering pump (new).
Pro Shock front coil over suspension with composite rear spring (new).
All front and rear bushings, bearings and ball joints replaced last season with OEM, includes inner and outer axle joints as well as front and rear driveshaft joints.
Speedo is currently disconnected as I need a shorter than stock cable. I do have a new 90 degree converter for it but have not gotten around to getting the cable. Odometer reads 48000 but is not accurate.
The carpeting is in excellent condition but the seats will probably have to be reupholstered as there is a tear in the drivers seat and a cigarette burn on the passenger seat (there when I bought the car, I have never smoked in it).
Runs on 93 octane pump gas.
This car is very quick and is a lot of fun to drive.
I am selling the car because I drive it very little...it is now second to the bike.
I will consider any offer that is reasonable but I am under no pressure to sell so please don't waste my time or yours.
NO TRADES.
406 CI SBC. 10.5/1+ compression built at local machine shop in winter of 2015 and dyno'd at 451 hp upon completion. I do have the dyno disc.
Forged scat rotating assembly and pistons.
Competition 270/276 cam with scorpion 1.6/1.7 roller rockers.
AFR 210 heads with VIC Jr intake.
Holley "ultra" 750 carb with 5" K&N filter,
MSD HEI distributor with 8.5 mm wires.
9 qt racing oil pan.
Be Cool aluminum radiator with electric fan.
Hooker headers with side pipes (a little rewrap needed on drivers side)
Duntov 3.54 differential.
700 R4 transmission with shift kit.
B&M ratchet shifter (new).
Hood mounted guages (narrow band air/fuel mixture, vacuum, oil pressure, temp).
Steeroids - rack and pinion conversion kit uses 86 corvette steering pump (new).
Pro Shock front coil over suspension with composite rear spring (new).
All front and rear bushings, bearings and ball joints replaced last season with OEM, includes inner and outer axle joints as well as front and rear driveshaft joints.
Speedo is currently disconnected as I need a shorter than stock cable. I do have a new 90 degree converter for it but have not gotten around to getting the cable. Odometer reads 48000 but is not accurate.
The carpeting is in excellent condition but the seats will probably have to be reupholstered as there is a tear in the drivers seat and a cigarette burn on the passenger seat (there when I bought the car, I have never smoked in it).
Runs on 93 octane pump gas.
This car is very quick and is a lot of fun to drive.
I am selling the car because I drive it very little...it is now second to the bike.
I will consider any offer that is reasonable but I am under no pressure to sell so please don't waste my time or yours.
NO TRADES.
05-02-2017, 10:40 AM
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
Asking price?
05-02-2017, 10:52 AM
#3
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,422
Received 5,331 Likes
on
2,775 Posts
No "best offer" threads allowed:
3. Best Offers & Gauging Interest
The forum will permit "OBO" or "serious offers" in a sale thread where a price has been stipulated.
We will not permit threads where no price is stated, and asks for open offers.
Members are not permitted to "gauge interest," in their item for sale thread. Such threads will create an ebay type auction, and that is unacceptable. Sellers must create their thread with an asking price included.
Only forum vendors are permitted to gauge interest in their products.
3. Best Offers & Gauging Interest
The forum will permit "OBO" or "serious offers" in a sale thread where a price has been stipulated.
We will not permit threads where no price is stated, and asks for open offers.
Members are not permitted to "gauge interest," in their item for sale thread. Such threads will create an ebay type auction, and that is unacceptable. Sellers must create their thread with an asking price included.
Only forum vendors are permitted to gauge interest in their products.
