FS: 71 Pro-Touring
02-12-2018, 07:25 PM
#1
Melting Slicks
Thread Starter
71 Pro-Touring
71 Pro Touring Corvette, only 600 miles With the Ride Tech 48 Hr Corvette selling last month on Barrett Jackson for $127,800 I thought it would be good to put my car on the market and see where it goes. This car is the perfect Pro Touring car and as you can see by the recent Auto Cross past Winners this C3 combination is extremely competitive. All my pictures are on photobucket, link here;
http://s152.photobucket.com/user/vst...?sort=2&page=1
Engine: Blue Print Engines LS3 427, Fuel Injected 618 hp with 574 lbs of massive torque
Exhaust : Custom Stahl Stepped headers into 3 1/2 inch side pipes with Sweet Thunders free flowing inserts. All wrapped in Jet Hot’s coating
Chassis: Custom frame built by Mid America Industries fitted with 95 Corvette C4 suspension, rack and pinon steering, Dana 44 rear with C4 corvette calibers , Protech rotors and pads. All bushings seals and suspension parts have all new seals bearing and tie rod ends, 4 point roll bar
Drive train: Transmission TREMAC TKO 600 5 spd and Quick time Bell housing with lightning shifter
Wheels: Team III LT-1 18 x 10 and 18 x 12
Shocks: Aldan coil overs in front with Blistein shocks in the rear with competition mono leave spring in the rear.
Tires; BF Goodrich G-Force Rivals P275/35Z/18 and 335/30Z/18
Fuel: Fuel Safe 22 Gallon fuel cell with Holley electric fuel pump
Interior: Corbeau A4 seats and retractable safety harness
DASH: Aluminum dash wrapped in Carbon fiber
Gauges: Auto meters Ultra Lite electric gauges, 5inch Speedometer and tachometer and 2 5/8 Oil Pressure, and temp, H2o Temp, fuel pressure, volt meter and fuel gauge
HVAC: Vintage Air
Exterior: body work done by Mid America Industries includes beautifully blended flares from molds taken from one of the 69 Owens Corning L-88 cars and the long L-88 Hood.
Paint; Radley Chevrolet Cadillac shop PPG Corvette 2016 Sunrise Orange with Black “Owens Corning like stripe” Stripe is blended into the clear coat so it is smooth to the touch
Bumpers: Front bumper is fiberglass.
Email' kmherrmann@comcast.net
thanks
http://s152.photobucket.com/user/vst...?sort=2&page=1
Engine: Blue Print Engines LS3 427, Fuel Injected 618 hp with 574 lbs of massive torque
Exhaust : Custom Stahl Stepped headers into 3 1/2 inch side pipes with Sweet Thunders free flowing inserts. All wrapped in Jet Hot’s coating
Chassis: Custom frame built by Mid America Industries fitted with 95 Corvette C4 suspension, rack and pinon steering, Dana 44 rear with C4 corvette calibers , Protech rotors and pads. All bushings seals and suspension parts have all new seals bearing and tie rod ends, 4 point roll bar
Drive train: Transmission TREMAC TKO 600 5 spd and Quick time Bell housing with lightning shifter
Wheels: Team III LT-1 18 x 10 and 18 x 12
Shocks: Aldan coil overs in front with Blistein shocks in the rear with competition mono leave spring in the rear.
Tires; BF Goodrich G-Force Rivals P275/35Z/18 and 335/30Z/18
Fuel: Fuel Safe 22 Gallon fuel cell with Holley electric fuel pump
Interior: Corbeau A4 seats and retractable safety harness
DASH: Aluminum dash wrapped in Carbon fiber
Gauges: Auto meters Ultra Lite electric gauges, 5inch Speedometer and tachometer and 2 5/8 Oil Pressure, and temp, H2o Temp, fuel pressure, volt meter and fuel gauge
HVAC: Vintage Air
Exterior: body work done by Mid America Industries includes beautifully blended flares from molds taken from one of the 69 Owens Corning L-88 cars and the long L-88 Hood.
Paint; Radley Chevrolet Cadillac shop PPG Corvette 2016 Sunrise Orange with Black “Owens Corning like stripe” Stripe is blended into the clear coat so it is smooth to the touch
Bumpers: Front bumper is fiberglass.
Email' kmherrmann@comcast.net
thanks
Last edited by vstol; 02-20-2019 at 04:25 PM.
02-13-2018, 08:59 AM
#4
Le Mans Master
71 Pro Touring Corvette, only 85 miles and asking $103K. With the Ride Tech 48 Hr Corvette selling last month on Barrett Jackson for $127,800 I thought it would be good to put my car on the market and see where it goes. This car is the perfect Pro Touring car and as you can see by the recent Auto Cross past Winners this C3 combination is extremely competitive. All my pictures are on photobucket, link here;
http://s152.photobucket.com/user/vst...?sort=2&page=1
Engine: Blue Print Engines LS3 427, Fuel Injected 618 hp with 574 lbs of massive torque
Exhaust : Custom Stahl Stepped headers into 3 1/2 inch side pipes with Sweet Thunders free flowing inserts. All wrapped in Jet Hot’s coating
Chassis: Custom frame built by Mid America Industries fitted with 95 Corvette C4 suspension, rack and pinon steering, Dana 44 rear with C4 corvette calibers , Protech rotors and pads. All bushings seals and suspension parts have all new seals bearing and tie rod ends, 4 point roll bar
Drive train: Transmission TREMAC TKO 600 5 spd and Quick time Bell housing with lightning shifter
Wheels: Team III LT-1 18 x 10 and 18 x 12
Shocks: Aldan coil overs in front with Blistein shocks in the rear with competition mono leave spring in the rear.
Tires; BF Goodrich G-Force Rivals P275/35Z/18 and 335/30Z/18
Fuel: Fuel Safe 22 Gallon fuel cell with Holley electric fuel pump
Interior: Corbeau A4 seats and retractable safety harness
DASH: Aluminum dash wrapped in Carbon fiber
Gauges: Auto meters Ultra Lite electric gauges, 5inch Speedometer and tachometer and 2 5/8 Oil Pressure, and temp, H2o Temp, fuel pressure, volt meter and fuel gauge
HVAC: Vintage Air
Exterior: body work done by Mid America Industries includes beautifully blended flares from molds taken from of the 69 Owens Corning L-88 cars and the long L-88 Hood.
Paint; Radley Chevrolet Cadillac shop PPG Corvette 2016 Sunrise Orange with Black “Owens Corning like stripe” Stripe is blended into the clear coat so it is smooth to the touch
Bumpers: Front bumper is fiberglass.
Email' kmherrmann@comcast.net
thanks
http://s152.photobucket.com/user/vst...?sort=2&page=1
Engine: Blue Print Engines LS3 427, Fuel Injected 618 hp with 574 lbs of massive torque
Exhaust : Custom Stahl Stepped headers into 3 1/2 inch side pipes with Sweet Thunders free flowing inserts. All wrapped in Jet Hot’s coating
Chassis: Custom frame built by Mid America Industries fitted with 95 Corvette C4 suspension, rack and pinon steering, Dana 44 rear with C4 corvette calibers , Protech rotors and pads. All bushings seals and suspension parts have all new seals bearing and tie rod ends, 4 point roll bar
Drive train: Transmission TREMAC TKO 600 5 spd and Quick time Bell housing with lightning shifter
Wheels: Team III LT-1 18 x 10 and 18 x 12
Shocks: Aldan coil overs in front with Blistein shocks in the rear with competition mono leave spring in the rear.
Tires; BF Goodrich G-Force Rivals P275/35Z/18 and 335/30Z/18
Fuel: Fuel Safe 22 Gallon fuel cell with Holley electric fuel pump
Interior: Corbeau A4 seats and retractable safety harness
DASH: Aluminum dash wrapped in Carbon fiber
Gauges: Auto meters Ultra Lite electric gauges, 5inch Speedometer and tachometer and 2 5/8 Oil Pressure, and temp, H2o Temp, fuel pressure, volt meter and fuel gauge
HVAC: Vintage Air
Exterior: body work done by Mid America Industries includes beautifully blended flares from molds taken from of the 69 Owens Corning L-88 cars and the long L-88 Hood.
Paint; Radley Chevrolet Cadillac shop PPG Corvette 2016 Sunrise Orange with Black “Owens Corning like stripe” Stripe is blended into the clear coat so it is smooth to the touch
Bumpers: Front bumper is fiberglass.
Email' kmherrmann@comcast.net
thanks
02-19-2018, 11:57 AM
#10
Melting Slicks
Thread Starter
Typical VA wx in the winter. Sleets on Sat, crappy Sunday and today with rain showers. Neil I need to move to Fla for the winter to drive the cars.
03-05-2018, 06:14 PM
#13
Melting Slicks
Thread Starter
Thanks for the comments and yep for long rides they come in handy if I have the windows down. With the windows up and the AC or heat on same effect. 
As for the sale all good offers considered. That said the wx is starting to come back around.
As for the sale all good offers considered. That said the wx is starting to come back around.
Last edited by vstol; 03-05-2018 at 06:17 PM.
03-18-2018, 05:15 PM
#18
Melting Slicks
Thread Starter
A shot to show the profile. Again all offers considered. Shows and auto cross events are almost here. 
Oops not sure how to turn the picture... help. Will need to take another one later
Oops not sure how to turn the picture... help. Will need to take another one later
Last edited by vstol; 03-18-2018 at 05:18 PM.
03-31-2018, 02:26 PM
#20
Melting Slicks
Thread Starter
Spring day so off I went for a 40 mile drive. It was the first time I sat in traffic but the water temp stayed steady at 210 degrees and oil temp never went past 170 degrees and that was when I was idling for about 5 minutes then stopped and go for several miles in town. Otherwise the oil temp stayed at 140 degrees. I just laugh when I hear there are cars with 700 plus HP. With 618hp and all this torque in a 3200 lb car it is a beast. Trying to see if the local airport will give us sometime for some high speed runs. Trying to get a video up on line, I need my daughters help.