FS: 70 Corvette Vert Restomod, 5 Speed, $15K [FL]
#1
Instructor
Thread Starter
70 Corvette Vert Restomod, 5 Speed, $15K [FL]
For Sale: 1970 Corvette Convertible Restomod w/73 style front clip, 5 Speed Transmission
Asking Price: $15K
Exterior Color: Monza Red
Interior Color: Black
Location: Parrish Florida
Below is a list of parts/upgrades to the car.
I. Engine
350 cubic inch, 430 HP, 425 LBS Torque, built by: Engine Factory, http://www.enginefactory.com/
4 Bolt Main, Full Round Seal Block
Cast Iron GM 350 Crankshaft
ZZ4 PM Connecting Rods
Speed Pro Hypereutectic Pistons, 10:1 Compression, Part #H345CP
Speed Pro Moly Rings
Edelbrock Roller Camshaft, Part #2204, Duration @ 050 234/238, Lift 539/548
Edelbrock Double Roller Timing Set
Edelbrock Performer RPM Aluminum Air-Gap Intake Manifold w/ EnduraShine, Part #75014
Edelbrock Performer RPM Aluminum Cylinder Heads With 64cc Combustion Chambers, Part #60899
TriMetal Heavy Duty Engine Bearings
Melling High Volume Oil Pump, Part #M55HP
Screw In Rocker Studs
Stainless Steel 2.02" Intake Valves
Stainless Steel 1.60" Exhaust Valves
Hard Seats And Guides For Unleaded Fuel
Chrome Oil Pan, Timing Cover, Air Cleaner, Thermostat Housing And Valve Covers
GM Harmonic Balancer Damper
Balanced, Blue Printed, Assembled And Painted
HEI Distributor with 53,000 Volt Coil and Tachometer Drive
Pro-Form Mini Torque Starter, for 168-tooth Flywheel, Part #67052
March Performance 6 Groove Serpentine Drive Bracket Kit, Part #20406
March Performance Billet Aluminum Sanden 508 A/C Compressor,
Hooker Full Length Competition Ceramic Coated Headers, Part #2456-1HKR
Hot Rod Air In-dash A/C Kit, Part #75-0068
Entropytec Aluminum Radiator with Dual Spal Fans
Tuff Stuff CS-144 Alternator 140 amp Chrome Alternator, Part #TFF-8173NA
Go EFI Fuel Injection System
II. Transmission
Keisler TKO 500, 5 Speed Transmission, http://www.keislerauto.com
Keisler Hydraulic Clutch Actuator Kit, Part # CAG-HWC3T
Pioneer 168 Tooth Standard Flywheel, Part #67052
RAM Automotive Powergrip Clutch Kit,
III. Rear End
3.36 GM Stock Rear Differential Gears (Dif. Code: CAM)
IV. Brakes
Hydratech Hydroboost Brake Booster
SSBC Front and Rear Force 10 Extreme 4 Piston Aluminum Brake Calipers, Part #’s A109AFR and A109ARR
Van Steel Slotted and Dimpled Brakes Rotors
V. Suspension
Vette Brakes & Products Front and Rear Performance Plus Kit, Part #42000
VI. Steering
Vette Brakes & Products Rack Attack, Rack and Pinion Kit, Part #12904
Van Steel Offset Trailing Arms, Part # BAOE-44-L/R
AGR High Performance Power Steering Pump, Part # 806324
VII. Wheels
American Racing Polished Torque Trust II, 17 x 8 with 4” Backspace or -11mm Offset, 5 x 4.75 Bolt Pattern
If you want to change it back to the 70 front, I have most of the parts, minus the font clip and short hood.
Parts:
Left/Right Fender Louvers (Egg Crates Side Grills)
Front Bumper
Right/Left Front Bumper Guards
Right/Left Chrome Grilles
Most of the brackets
Windshield Wiper Door and Brackets
I also have the 4 speed transmission that came out of it.
Asking Price: $15K
Exterior Color: Monza Red
Interior Color: Black
Location: Parrish Florida
Below is a list of parts/upgrades to the car.
I. Engine
350 cubic inch, 430 HP, 425 LBS Torque, built by: Engine Factory, http://www.enginefactory.com/
4 Bolt Main, Full Round Seal Block
Cast Iron GM 350 Crankshaft
ZZ4 PM Connecting Rods
Speed Pro Hypereutectic Pistons, 10:1 Compression, Part #H345CP
Speed Pro Moly Rings
Edelbrock Roller Camshaft, Part #2204, Duration @ 050 234/238, Lift 539/548
Edelbrock Double Roller Timing Set
Edelbrock Performer RPM Aluminum Air-Gap Intake Manifold w/ EnduraShine, Part #75014
Edelbrock Performer RPM Aluminum Cylinder Heads With 64cc Combustion Chambers, Part #60899
TriMetal Heavy Duty Engine Bearings
Melling High Volume Oil Pump, Part #M55HP
Screw In Rocker Studs
Stainless Steel 2.02" Intake Valves
Stainless Steel 1.60" Exhaust Valves
Hard Seats And Guides For Unleaded Fuel
Chrome Oil Pan, Timing Cover, Air Cleaner, Thermostat Housing And Valve Covers
GM Harmonic Balancer Damper
Balanced, Blue Printed, Assembled And Painted
HEI Distributor with 53,000 Volt Coil and Tachometer Drive
Pro-Form Mini Torque Starter, for 168-tooth Flywheel, Part #67052
March Performance 6 Groove Serpentine Drive Bracket Kit, Part #20406
March Performance Billet Aluminum Sanden 508 A/C Compressor,
Hooker Full Length Competition Ceramic Coated Headers, Part #2456-1HKR
Hot Rod Air In-dash A/C Kit, Part #75-0068
Entropytec Aluminum Radiator with Dual Spal Fans
Tuff Stuff CS-144 Alternator 140 amp Chrome Alternator, Part #TFF-8173NA
Go EFI Fuel Injection System
II. Transmission
Keisler TKO 500, 5 Speed Transmission, http://www.keislerauto.com
Keisler Hydraulic Clutch Actuator Kit, Part # CAG-HWC3T
Pioneer 168 Tooth Standard Flywheel, Part #67052
RAM Automotive Powergrip Clutch Kit,
III. Rear End
3.36 GM Stock Rear Differential Gears (Dif. Code: CAM)
IV. Brakes
Hydratech Hydroboost Brake Booster
SSBC Front and Rear Force 10 Extreme 4 Piston Aluminum Brake Calipers, Part #’s A109AFR and A109ARR
Van Steel Slotted and Dimpled Brakes Rotors
V. Suspension
Vette Brakes & Products Front and Rear Performance Plus Kit, Part #42000
VI. Steering
Vette Brakes & Products Rack Attack, Rack and Pinion Kit, Part #12904
Van Steel Offset Trailing Arms, Part # BAOE-44-L/R
AGR High Performance Power Steering Pump, Part # 806324
VII. Wheels
American Racing Polished Torque Trust II, 17 x 8 with 4” Backspace or -11mm Offset, 5 x 4.75 Bolt Pattern
If you want to change it back to the 70 front, I have most of the parts, minus the font clip and short hood.
Parts:
Left/Right Fender Louvers (Egg Crates Side Grills)
Front Bumper
Right/Left Front Bumper Guards
Right/Left Chrome Grilles
Most of the brackets
Windshield Wiper Door and Brackets
I also have the 4 speed transmission that came out of it.
Last edited by BrooksCJ; 01-12-2020 at 02:37 PM. Reason: Added some more pics.
The following 6 users liked this post by BrooksCJ:
71 Green 454 (01-11-2020),
72greg (01-29-2020),
bmans vette (01-11-2020),
red topless gator (01-14-2020),
SMF (01-12-2020),
and 1 others liked this post.
#3
Instructor
Thread Starter
Extra Parts
I forgot to mention that if you want to change it back to the 70 front, I have most of the parts, minus the font clip and short hood.
Parts:
Left/Right Fender Louvers (Egg Crates Side Grills)
Front Bumper
Right/Left Front Bumper Guards
Right/Left Chrome Grilles
Most of the brackets
Windshield Wiper Door and Brackets
I also have the 4 speed transmission that came out of it.
Last edited by BrooksCJ; 01-11-2020 at 05:40 PM.
The following users liked this post:
SMF (01-11-2020)
#8
This car is a great value if basically everything checks out...Been a C3 vert owner for almost 20 years now...One of the best values I have seen in a while...
Numbers matching ? No....Who cares though...Let someone enjoy it for what it is A solid looking car.
Someone who is looking for a tank sticker or astro ventilation markings on the windows, look elsewhere.
Sorry guys some vette buyers take it to the extreme when it comes to purchasing a C3..
Good luck with the sale...I personally like the look and the fact it does not have that factory boat anchor of a motor in it...
Congrats to the new owner as well when he gets it.....Be safe...
Numbers matching ? No....Who cares though...Let someone enjoy it for what it is A solid looking car.
Someone who is looking for a tank sticker or astro ventilation markings on the windows, look elsewhere.
Sorry guys some vette buyers take it to the extreme when it comes to purchasing a C3..
Good luck with the sale...I personally like the look and the fact it does not have that factory boat anchor of a motor in it...
Congrats to the new owner as well when he gets it.....Be safe...
The following users liked this post:
71 Green 454 (01-12-2020)
#9
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
This car is a decent value so much for "changing things ruins value".
Underhoos has lots spent, 4 spd vintage ac clean, sold.
OP whats up with the bushings out back?
Underhoos has lots spent, 4 spd vintage ac clean, sold.
OP whats up with the bushings out back?
#10
Dr. Detroit
Member Since: Mar 2012
Location: New Braunfels Texas
Posts: 9,963
Received 3,893 Likes
on
2,564 Posts
Amazing deal........unbelievable.
Jebby
Jebby
#12
Instructor
Thread Starter
Deposit Placed on Vette
A deposit has been placed on the Vette with a pickup of next weekend. If the deal falls through, I'll let you all know.
The following 3 users liked this post by BrooksCJ:
The following 2 users liked this post by jimrowe0:
71 Green 454 (01-26-2020),
SMF (01-25-2020)
The following 3 users liked this post by BrooksCJ: