New Member
Burning Brakes
Joined: Mar 2005
Posts: 1,054
Likes: 715
From: San Antonio Texas
Happy to have ya!......There will be a Corvette show and rally April 16 in Boerne Texas which is just north of San Antone........Not too far from beautiful east Texas....Come see the Hill Country!!!!!
Thread Starter
7th Gear
Joined: Mar 2005
Posts: 7
Likes: 0
From: Marshall TX
Originally Posted by joe3906
Welcome, Welcome, and Welcome. "Cosmetic Up-keep." Never heard the term, but it is certainly appropriate. Plenty of help for all kinds of questions here, ask away.
Joe B.
Joe B.
His department is mechanical.... mine is make sure it LOOKS good on the road 
I hadn't been able to drive it for nearly a year (long, sad story) but we finally got around to giving it the TLC needed. The dash was screwed up, he got it fixed and I went for a drive YEEHAWWW! Then I noticed the the top was lifting off on the back side,,, had to turn around and come home.... back to the garage
Thank y'all for the welcome!
~Laine~
Instructor
Joined: Feb 2005
Posts: 144
Likes: 0
Welcome to both you guys. 
Enjoy the drives!!!!
My top on my 94 was lifting in the drivers rear side from the frame and the weatherstrip company that we use, put motorcraft (I work for a ford dealership) silicone gasket and sealant in there and it has stuck since.
Enjoy the drives!!!!My top on my 94 was lifting in the drivers rear side from the frame and the weatherstrip company that we use, put motorcraft (I work for a ford dealership) silicone gasket and sealant in there and it has stuck since.
Drifting
Joined: Nov 2002
Posts: 1,593
Likes: 0
From: Mobile AL
St. Jude Donor '05
Originally Posted by notherc4
Welcome to both you guys. Enjoy the drives!!!!
My top on my 94 was lifting in the drivers rear side from the frame and the weatherstrip company that we use, put motorcraft (I work for a ford dealership) silicone gasket and sealant in there and it has stuck since.
Enjoy the drives!!!!My top on my 94 was lifting in the drivers rear side from the frame and the weatherstrip company that we use, put motorcraft (I work for a ford dealership) silicone gasket and sealant in there and it has stuck since.
Thread Starter
7th Gear
Joined: Mar 2005
Posts: 7
Likes: 0
From: Marshall TX
Originally Posted by SilverBeast
Welcome to you both. I know you're enjoying the bluebonnets right now! I agree - go with a quality silicone sealant (O'Reilly, NAPA, Car Quest, Autozone, Advanced). Put a thin bead and push it back together and let it set for about 12 hours.
Thank you!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski