When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone know of a brand or source or have experience with a high temp Gloss Black paint that I can BRUSH on my rear calipers and the rotor areas where the wheels mount; not the area where the pads touch...the part that always gets rusty. I want to paint these like the black paint used on the front rotors that have the chrome word "Corvette" lettering. All I've been able to find is sold in spray cans.
Anyone know of a brand or source or have experience with a high temp Gloss Black paint that I can BRUSH on my rear calipers and the rotor areas where the wheels mount; not the area where the pads touch...the part that always gets rusty. I want to paint these like the black paint used on the front rotors that have the chrome word "Corvette" lettering. All I've been able to find is sold in spray cans.
Get an Eastwood catalog or go on their website eastwood.com. They have a good caliper paint kit that you brush on.
I just did mine in red a couple of weeks ago., go to schucks or autozone and get a caliper paint kit, varied colors, just over 20 dollars. Comes with cleaner, ceramic high temp paint, masking tape and applicator. It was an easy job and came out great. Looks good with new chrome zr-1 rims.....
I just did mine in red a couple of weeks ago., go to schucks or autozone and get a caliper paint kit, varied colors, just over 20 dollars. Comes with cleaner, ceramic high temp paint, masking tape and applicator. It was an easy job and came out great. Looks good with new chrome zr-1 rims.....
DupliColor has a brush on ceramic caliper paint, I bought it a Wally-World for about $15. Comes in a kit with cleaner, paint, masking tape, instructions and brush. It was a very easy job and has stayed with it so far.
DupliColor has a brush on ceramic caliper paint, I bought it a Wally-World for about $15. Comes in a kit with cleaner, paint, masking tape, instructions and brush. It was a very easy job and has stayed with it so far.
teebee, Thanks, that's what I hoped I'd find. I looked at the Duplicolor site some time ago while doing a GOOGLE search, but missed the part about their brush on paint. I'm going to WalMart this PM to check it out. Only the back calipers need painted; front calipers came painted with a gloss back. It's the part of the rotor where the wheel attaches and the pads don't touch that I really want to paint. I'm tired of looking at the rust there that shows thru the chrome ZR1 wheels.
Thanks also to all the others who gave me their good advice. I've got a "full plate" of info now to digest. You CF folks are the GREATEST!
VHT red in a rattle can. $8 and spend the rest of your money on cleaners.
WOW! That sure looks good. I'd like mine to look that great but done in gloss black because my BEAST is yellow with black in the ZR1 logos, Black Widow painted LT5, and a black glass top. Thanks for posting the pic.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.