When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well i always see threads for pics for exterior looks. Why not show what the inside looks like. I'll start off with mine. 86 red leather. Power seat on the driver side, Manual on the passenger As you can see, I need weatherstripping. Figures.. Typical 20 year old C4
Last edited by Nick 418; Jan 20, 2006 at 02:46 AM.
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
87 vert with Wheelskin, Mid America console cover and home made breadbox elim.
Note: At time of pics I had dyed my dash top to match the interior. I changed back to stock as there was too much glare.
Very nice Mojo!!! Yes...BEER is one of the major food groups....although I don't know where it goes on the pyramid!!! And they say ya can't take a Vette food shopping
85 Stalker I also have considdered putting gauges in the dash like that, But I am going to use the 2 outside vents instead, looks good. I am thinking about getting the 4 gauge cage for the 69 Camaro console and cutting them out to try and angle the gauges towards me.
85 Stalker I also have considdered putting gauges in the dash like that, But I am going to use the 2 outside vents instead, looks good. I am thinking about getting the 4 gauge cage for the 69 Camaro console and cutting them out to try and angle the gauges towards me.
If I had to do it over again, I would cut some cup gauges at an angle in place of the ash try door. But it all depends on what typ of shifter you are running.
I'm kicking around the idea of switching from the TCI Th350 to a built 4L80E. If I do that, I will need to convert the V-Matic to another shifer -- like the Quick series shifter.
Mine is a 4+3 but I am saving the front cupholder in case I want to go nitrous, the gauge would be a perfect fit, and the back one is for my pack of butts and my cell phone.