Door problems
Thread Starter
Racer
Joined: Jul 2006
Posts: 308
Likes: 0
From: Grapevine TX
Door problems
anyone know of the best way to do this my 93 vetts driver door has sliped down and bit and i need to ajust it up a bit so it will open with the rag top on it. if anyone has good advice on this let me know
Thanks
if not ill write up an interesting how to of do's and dont's lol
Taylor
Thanks
if not ill write up an interesting how to of do's and dont's lol
Taylor
Race Director
Joined: May 2006
Posts: 10,691
Likes: 71
From: Phoenix Arizona
Check your hinge bushings first. then if they're okay, pull the battery cover. Get a block of wood and a floor jack. Jack the door up untill there is a liitle pressure on it, and then loosen the hinge bolts on the bottom hinge just past snug. Then start loosening the top hinge bolts until the door starts to raise, then tighten. It may take a few times. Be carefull to adjust the battery cover when you replace it
