Blower Power Module
Thread Starter
Advanced
Joined: May 2006
Posts: 59
Likes: 0
From: SPRUCE GROVE ALBERTA
Blower Power Module
Well, if you have tried recently to get a blower power module fo a C68 electrionic A/C part # ac delco 15-71642 ... GOOD LUCK. Apparently ac delco has over 100 back orders and has no time frame to have them filled?
Has anyone had this problem and had a successful source for new or used supplier?
Has anyone had this problem and had a successful source for new or used supplier?
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Are these sealed on the Corvette? If not, they're a pretty simple circuit board that anyone with a little knowledge of basic electronics could repair quite easily.
Thread Starter
Advanced
Joined: May 2006
Posts: 59
Likes: 0
From: SPRUCE GROVE ALBERTA
Sealed
Yes these are a sealed unit, the heat sink & connector assembly comes off but the module itself is sealed.
I'll try napa, to see if they have one. Thanks for the help!
I'll try napa, to see if they have one. Thanks for the help!
