Checking Codes
Thread Starter
Intermediate
Joined: Feb 2004
Posts: 43
Likes: 0
From: Hayward CA
Checking Codes
I've been away for quite a while, paying more attention to my *other* American iron (my Harley). But the vette needs me again, so I need to take care of her.
I *know* there's a thread here that describes how to check ECM codes by shorting pins on the under-dash connector and reading the flashing lights, but I've spent nearly an hour unsuccessfully looking for it. Any pointers would be much appreciated, and I appologize for what must be the umteenth time this has been posted!
Z
PS: She's a 92 LT1
I *know* there's a thread here that describes how to check ECM codes by shorting pins on the under-dash connector and reading the flashing lights, but I've spent nearly an hour unsuccessfully looking for it. Any pointers would be much appreciated, and I appologize for what must be the umteenth time this has been posted!
Z
PS: She's a 92 LT1
Pro
Joined: Jun 2004
Posts: 520
Likes: 2
From: Mandeville, LA / Clemson, SC
All you have to do is jump two pins....and the DTCs will be displayed on your dash.
http://www.corvettephotographs.com/c4vettes/codes.htm
http://www.corvettephotographs.com/c4vettes/codes.htm
Le Mans Master
Joined: Feb 2006
Posts: 8,753
Likes: 9
From: Louisiana
