engine bay revisited
Thread Starter
Pro
Joined: Sep 2003
Posts: 655
Likes: 2
From: Rio Vista ca.
engine bay revisited
Do you guys who clean your engine bay with rags and Simple Green use the Simple Green full strength as it comes in the spray bottle or do you dilute it? Going to attack the engine bay today and don't want to screw anything up.
Thanks, Kim
Thanks, Kim
Le Mans Master
Joined: Aug 2003
Posts: 9,884
Likes: 3
From: Magnolia Mississippi
St. Jude '03-'04-'05-'06-'07
Full strength, rags, tooth brush, scotch brite pads, portable steam cleaner, assorted scrapers, and go to town - this engine of mine was done that way:
Drifting
Joined: Sep 2005
Posts: 1,867
Likes: 3
From: Pasadena Maryland
Be very careful with a hose and an LT-1, Opti's do not like to get wet. I would not use a hose on any modern engine compartment, too many electrical connections for water to get into and cause trouble.
Pro
Joined: Sep 2007
Posts: 713
Likes: 0
From: Commerce Twsp Michigan
Did you polish your own intake? If so, what process did you use? I see I have many textured aluminum surfaces under the hood that I would like to polish to a shine. What is the best way to go about it? I have a 91 L98
