Help with Driveability Issue
Thread Starter
Advanced
Joined: Dec 2005
Posts: 52
Likes: 0
From: Jonesboro Ga
Help with Driveability Issue
I have a 87 vette that I was probing the dianostic port (OBD1) with a test light. I touched the D or E pin with the test light and heard some noise coming from under the hood. I went to start the engine and it was a little hard to start. Once it started, it had a miss in it like it was not firing on all cylinders. It has no power to pull off, it just dies. Before I started with the test light, the engine ran perfect. I replaced the control module in the dist and no help.....any suggestions.
Thanks
Thanks
