Sawblade Stripping Question
Thread Starter
Instructor
Joined: Aug 2007
Posts: 144
Likes: 0
From: new kent virginia
Sawblade Stripping Question
I Stripped The Clear And Paint Off My Sawblades And The Raw Product Is Rough Not Smooth, I Used Aircraft Stripper And A Plastic Scraper To Remove. Do I Need To Sand With Wet/dry Paper Or Any Suggestions?
Safety Car
Joined: Sep 2002
Posts: 4,971
Likes: 9
From: The reason time exists is so everything doesn't happen at once
It depends on the finish you're trying to get. If you're going to re-clear coat the current finish is what came from the factory. Just make sure you get all the stripper off and neutralized before applying any finish. If you intend to polish them to a high shine you'll need progressively finer grits, up to about 1000 (?) then a polishing compound.
Check the archives, some members have polished their wheels. A lot of work but well worth the effort.
Check the archives, some members have polished their wheels. A lot of work but well worth the effort.
