Window motor FIXED!!!!
Thread Starter
Instructor
Joined: Jul 2008
Posts: 144
Likes: 0
From: Carrollton Texas
Window motor FIXED!!!!
So i got tired of not having a passenger side window, so i took this evening as a good oppurtunity to get out there and take the door pannel off. After taking it off, and messing around with the insides, i was a bout to bite the bullet and buy a new window motor. Just before putting everything back together, i saw that there was a slight gap where a bolt used to be where the solinoid bolts to the motor (there was one on the other side) so i took a pair of needle nose pliars and clamped the gap shut and sure enough window went up and down like a charm. I then took a small piece of metel and wedged it in there, and surounded the outside of the gap with J B Weld (my best tool in my tool box) Let it dry up and it is fixed
Just though id share this with anyone whos had the same problem.
Thats 53 dollars back in my pocket.
Just though id share this with anyone whos had the same problem.
Thats 53 dollars back in my pocket.
