****LED Third Tail Light - group purchase****
Thread Starter
Former Vendor
Joined: Jun 2009
Posts: 286
Likes: 0
From: New York - Long Island
****LED Third Tail Light - group purchase****
From corveteHID.com comes the group purchase most of you have been itching for! 1984-1996 corvette LED third brake light replacement LED tail lights!
You can now replace your stock bumper mounted or hatch mounted third tail light bulb with our long lasting incredibly bright LED bulbs. The bumper mounted LED bulb is embedded with 39 super bright red SMD chips, which are both radially and top mounted. The hatch mounted third brake light kit comes with 4 led bulb modules. Each module is embedded with 3 high power red SMD chips.
Eliminate the hassle of constantly replacing your stock burnt out bulbs by upgrading to LED. Our bulbs are weather and shock resistant and will last as long as your Corvette will. Increased brightness means increased safety, and that is important with such a low riding sports car. The good part about these third brake lights is that you do not have to change the electronic flasher to use them! Simply unplug your stock bulbs and replace with our LED ones and enjoy the added safety and reliability that is associated with LED's.
L.E.D. lights last longer, shine brighter and light faster than conventional bulbs, providing additional safety. Plugs directly into stock bulb socket, thus avoiding the need to cut into your stock wiring harness.
We are offering 30% off with this HUGE group purchase!!! Just use the word third as your promotional code to receive the 30% off. 30% off for the first 20 people who join this group purchase
www.corvetteHID.com
Thanks for looking!
You can now replace your stock bumper mounted or hatch mounted third tail light bulb with our long lasting incredibly bright LED bulbs. The bumper mounted LED bulb is embedded with 39 super bright red SMD chips, which are both radially and top mounted. The hatch mounted third brake light kit comes with 4 led bulb modules. Each module is embedded with 3 high power red SMD chips.
Eliminate the hassle of constantly replacing your stock burnt out bulbs by upgrading to LED. Our bulbs are weather and shock resistant and will last as long as your Corvette will. Increased brightness means increased safety, and that is important with such a low riding sports car. The good part about these third brake lights is that you do not have to change the electronic flasher to use them! Simply unplug your stock bulbs and replace with our LED ones and enjoy the added safety and reliability that is associated with LED's.
L.E.D. lights last longer, shine brighter and light faster than conventional bulbs, providing additional safety. Plugs directly into stock bulb socket, thus avoiding the need to cut into your stock wiring harness.
We are offering 30% off with this HUGE group purchase!!! Just use the word third as your promotional code to receive the 30% off. 30% off for the first 20 people who join this group purchase
www.corvetteHID.com
Thanks for looking!
Last edited by Corvette HID; Dec 11, 2009 at 06:35 PM.
Le Mans Master
Joined: May 1999
Posts: 6,517
Likes: 1,303
From: Windermere FL
#2 - You beat me, as I am too slow...
Thanks Yosi!
For those that want to and a nice pulsing effect, I have installed this on my Vert. Works great on the Vert since I don't have to worry about hiding it. Works as advertised. Just cut the 12V wire (White in my case) that goes into the bulb socket and splice this in the middle. Screw the third wire to ground. Hardest part was taking the license plate off (vert). I soldered it in since it gets kind of really dirty back in there and finished it off with heat wrap.
This is the best solution since it only pulses for a few times then goes solid. And if you keep applying brakes like in a stop and go traffic it does not pulse at all. So it won't be annoying to the "Expletive Deleted" behind you.
Got the one from here (cheapest delivered) but they sell them all over the place. Just Google WebElectric Brake Light Pulser -
http://estore.websitepros.com/802805/Detail.bok?no=220
I assume it works fine with any bulb, as I tested it with just a volt meter and no bulb before I installed it.
Thanks Yosi!
For those that want to and a nice pulsing effect, I have installed this on my Vert. Works great on the Vert since I don't have to worry about hiding it. Works as advertised. Just cut the 12V wire (White in my case) that goes into the bulb socket and splice this in the middle. Screw the third wire to ground. Hardest part was taking the license plate off (vert). I soldered it in since it gets kind of really dirty back in there and finished it off with heat wrap.
This is the best solution since it only pulses for a few times then goes solid. And if you keep applying brakes like in a stop and go traffic it does not pulse at all. So it won't be annoying to the "Expletive Deleted" behind you.
Got the one from here (cheapest delivered) but they sell them all over the place. Just Google WebElectric Brake Light Pulser -
http://estore.websitepros.com/802805/Detail.bok?no=220
I assume it works fine with any bulb, as I tested it with just a volt meter and no bulb before I installed it.
Last edited by Flame Red; Nov 22, 2009 at 04:14 PM.
Tech Contributor
Joined: Aug 2006
Posts: 9,933
Likes: 103
From: Peoria Arizona.. Resident Gold Cylon
Yosi I placed my order got all the way to the paypal screen and then your system deletes my order and sends me back to the sign in screen. This is just like when I ordered the foglights. Please let me know how you wish to procede.
Thread Starter
Former Vendor
Joined: Jun 2009
Posts: 286
Likes: 0
From: New York - Long Island
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Oct 2007
Posts: 9,698
Likes: 3,466
From: Akron Ohio
2025 Corvette of the Year Finalist - Modified
2024 C5 of the Year Winner - Modified
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
Any pictures of these installed?
Drifting
Joined: Jun 2007
Posts: 1,261
Likes: 2
From: Prather, California -1990 ZR-1 White/Flame Red- -SOLD!!-
Safety Car
Joined: Jul 2008
Posts: 3,966
Likes: 4
From: Made In America
St. Jude Donor '10-'11
Thread Starter
Former Vendor
Joined: Jun 2009
Posts: 286
Likes: 0
From: New York - Long Island
These are pictures of the hatch mounted bulb in the third brake light. I put only one bulb in the second bulb bay from the left to show a comparison of how it looks when illuminated and when it is off.
Was kind of hard to capture it right, but I think I did an OK job
These bulbs are bright, but I think what's just as important and nice about these LEDs is that they will not burn out on you in a matter of months. These will last you years! Their instant on and instant off is a nice feature as well
Was kind of hard to capture it right, but I think I did an OK job
These bulbs are bright, but I think what's just as important and nice about these LEDs is that they will not burn out on you in a matter of months. These will last you years! Their instant on and instant off is a nice feature as well