My wheels........
Thread Starter
Drifting
Joined: Apr 2000
Posts: 1,915
Likes: 0
From: Maurice, LA
My wheels........
Hey all,
As you know, i have been on a quest to find out information on the wheels that are on my car. Well, i got ahold of the guy that sold her to me, and he said they are American Racing wheels. Here's a close up....
I am thinking that they are no longer produced. I dont see them on the web page at all. I hope this helps for those of you who wanted to purchase some like these. Does anyone know the email of American Racing? I would like to email them to get some info. Thanks!! :smash:
As you know, i have been on a quest to find out information on the wheels that are on my car. Well, i got ahold of the guy that sold her to me, and he said they are American Racing wheels. Here's a close up....
I am thinking that they are no longer produced. I dont see them on the web page at all. I hope this helps for those of you who wanted to purchase some like these. Does anyone know the email of American Racing? I would like to email them to get some info. Thanks!! :smash:
Burning Brakes
Joined: Apr 2001
Posts: 799
Likes: 1
From: Fremont CA
Re: My wheels........ (GiDvEtTe84)
Yours look like the Gotti wheels. Ronal sells them.
http://www.ronalusa.com/wheels-2002/r1001.html
Hmm, "Limited Supply-Close Out".
http://www.ronalusa.com/wheels-2002/r1001.html
Hmm, "Limited Supply-Close Out".
Thread Starter
Drifting
Joined: Apr 2000
Posts: 1,915
Likes: 0
From: Maurice, LA
Re: My wheels........
Ha!!No, i did that. :jester I couldnt find any support for my wheels when i lost 2 center caps, so i just got some that fit the hole. Sorry for the confusion! :cheers:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Feb 2002
Posts: 4,286
Likes: 4
From: Guam
Re: My wheels........ (84willnotfire)
I have seen wheels exactlly like that. They were made in Asia and were somewhat copy cats of the American Racings and Gottis. My 69 vette has AR wheels in that style and I had to get another look at them to compare. If you demount the tire, you may find some numbers and a manufacturers stamp which should tell you where they were made. The caps threw me off track. They do like nice though. In the early 80s many Asian wheels that were made under limited production were imported in to the mainland.
Le Mans Master
Joined: Feb 1999
Posts: 6,631
Likes: 1
From: Stoplight City IN
S. Indiana Events Coordinator
Cruise-In I Veteran
Re: My wheels........ (Patrick96LT4)
Their site was down when I tried, but here's their contact page:
http://www.americanracing.com/contactus/
http://www.americanracing.com/contactus/
Thread Starter
Drifting
Joined: Apr 2000
Posts: 1,915
Likes: 0
From: Maurice, LA
Re: My wheels........
Thanks for the help all. I have been to that site. But i dont see an email address on it.
Engine compartment's too dirty!!!! :eek:
How come you did't get a shot of that old cease-fire in your picture? :D
