Test Post
Thread Starter
Drifting
Joined: Jun 2009
Posts: 1,284
Likes: 443
From: Upstate NY
Test Post
I seem to have problems posting, so I hope this works.
I'm replacing the Front air dam on my 84 with a stock type replecement. I removed the screws that hold the backer and the strip seems to be held in place with plastic pins? Do I pry the backer off or what?
Thanks,
Glen
I'm replacing the Front air dam on my 84 with a stock type replecement. I removed the screws that hold the backer and the strip seems to be held in place with plastic pins? Do I pry the backer off or what?
Thanks,
Glen
Last edited by glava2876; Jan 6, 2010 at 04:03 PM.
Team Owner
Joined: Dec 2007
Posts: 20,974
Likes: 261
I seem to have problems posting, so I hope this works.
I'm replacing the Front air dam on my 84 with a stock type replecement. I removed the screws that hold the backer and the strip seems to be held in place with plastic pins? Do I pry the backer off or what?
Thanks,
Glen
I'm replacing the Front air dam on my 84 with a stock type replecement. I removed the screws that hold the backer and the strip seems to be held in place with plastic pins? Do I pry the backer off or what?
Thanks,
Glen
my air dam is just a few screw with metal strips above it.
I would just take it all off, and you'll see how it goes.
