source for a windshield gasket?
Thread Starter
Le Mans Master
Joined: Nov 2009
Posts: 6,882
Likes: 234
From: Bangkok, Thailand
source for a windshield gasket?
OK, I admit I haven't done much digging on this yet. My windshield is cracked and I want to replace it when I get paid Wednesday. The glass guys say they can't get the gasket - anyone have a good source for a new one?
Last edited by mcm95403; Sep 19, 2010 at 02:47 AM.
Drifting
Joined: Jan 2007
Posts: 1,908
Likes: 3
From: Supreme Soviet Peace-Loving Pipple's Kollektive of Seattle Wa
I can't imagine the windshield gasket being different over the 13 model years of C4. Have you tried a different glass guy or a Chevy dealer?
I just looked thru the Corvette Central catalog and the on-line catalog. looks like they offer the windshield set tape for bonding the glass to the frames and the 2 lower mould strips as well. I wonder if the top and sides of the glass are comprised of the weatherstripping for the sides and top. Earlier cars used a full perimeter rubber moulding but these cars are different. They show a windshield header weatherstrip header and pillar under the 'weatherstrip' tab and the windshield set-tape and the 2 lower mouldings under the 'glass' tab.
I just looked thru the Corvette Central catalog and the on-line catalog. looks like they offer the windshield set tape for bonding the glass to the frames and the 2 lower mould strips as well. I wonder if the top and sides of the glass are comprised of the weatherstripping for the sides and top. Earlier cars used a full perimeter rubber moulding but these cars are different. They show a windshield header weatherstrip header and pillar under the 'weatherstrip' tab and the windshield set-tape and the 2 lower mouldings under the 'glass' tab.
Last edited by SQUIRMIN VERMIN 84; Sep 19, 2010 at 07:15 AM. Reason: too many keys, only 10 fingers
Race Director
Joined: Oct 2005
Posts: 11,770
Likes: 175
From: Rolla Missouri
2021 C4 of the Year - Unmodified Finalist
St. Jude Donor '10 thru '25
This does not seem to be a job for then inexperienced.
Here is the thread corvettedan22 started:
http://forums.corvetteforum.com/c4-g...r-replace.html
