C4 Leather set removal
Thread Starter
Pro
Joined: May 2001
Posts: 669
Likes: 7
From: New Jersey
C4 Leather seat removal
Hey guys my driver seat foam is broken on the lowest left bolster on the back on the seat. It's the 89 standard seat. The leather has not ripped yet but before it does :( I would like to remove the back of the seat and try and repair and possibly dye the slight wrinkels in the leather. So my question is to anyone who removed their seat back what the process?
Thanks in Advance...
[Modified by 89C4L98, 6:59 PM 4/2/2002]
Thanks in Advance...
[Modified by 89C4L98, 6:59 PM 4/2/2002]
Melting Slicks
Joined: Nov 2000
Posts: 3,388
Likes: 1
From: X
Re: C4 Leather seat removal (89C4L98)
What I used was a catspaw (carpenters tool) I shoved it under the leather and pushed the clips towards the center. You can see in the photo where they are located. I would switch the seats if I were you...The bottoms have a little wire under the front of the seat. Push it towards the back and lift the bottom out.
Thread Starter
Pro
Joined: May 2001
Posts: 669
Likes: 7
From: New Jersey
Re: C4 Leather seat removal (JonM)
My other seat is perfect. So is this except for the bottom left bolster from getting in and out the foam must have been jarred loose and now there is a soft spot. Im going to take some pictures and post them tommrow.. I saw 1 or 2 clips just wasnt sure how hard it is to remove them (looks easy) but how difficult it is to reinstall them.
If only I could spell I might be dangerous
[Modified by 89C4L98, 7:47 PM 4/2/2002]
If only I could spell I might be dangerous
[Modified by 89C4L98, 7:47 PM 4/2/2002]
