Help with tailight wiring.
Thread Starter
Instructor
Joined: Jun 2008
Posts: 113
Likes: 1
From: Rock Hill SC
Help with tailight wiring.
Purchased both the Sequential Turn Signal kit and DRL kit from Web Electrics. Front should be no problem but the rear wiring may be an issue. For those that have taken the rear bumper off, are the turn signal wires easier to get to from the gas door opening or the license plate opening? I know some have looked at the build sheet on the gas tank and taken the rear Bumper off. I am treading into an uncharted area and any help would be appreciated.
Le Mans Master
Joined: May 2004
Posts: 5,866
Likes: 60
From: Hellinois
Finalist 2020 C4 of the Year - Modified
Remove license plate and back up lights. Reach in and remove two 10mm screws, one on each side of the taillight assy. Pop taillight out then reach in through that opening & unplug the outer taillight. Change all bulbs, do the wiring & re-assemble
