When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You didn't mention the year car you have, but on my 89 you pop the hatch glass and at the top are 2 large recessed phillips head screws you have to remove, then it pulls right off..I will mention that you have to use a stubby screwdriver to get to the screws, not much room under there.....WW
Sorry mine is a 94 so it is in the rear bumper, i am guessing i need to remove the fuel door
no need to remove the fuel door. i did my 96 last summer, and if i remember correctly, i removed the license plate, [correction] and the license lamp assembly - not the back-up lights. seems to me there are two (2) 7mm screws holding the assembly to the rear fascia.
Thanks, yes remove the liscence plate! I am not sure I am sold on the led 3rd light. Kinda does not match the taillights, i need to see if i can cet one that is more blacked out or a vinyl blackout for it
..WW
