When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The gauges are from from Speed hut. The Speedo is a GPS It will tell uou your 1/4 time, 0-60 time, Mileage, Trip, Digital Speed, Peak RPM and speed. The tach has a programmable shift light.
They are both custom made The speedo says "Corvette" and the Gauges say "1 Mean 85"
I built my own Tablet holder...it was much harder than you would think
I covered the panels with Leather, it took me a while to find the right type ...turns out it was on my couch the whole time ...No joke I skinned my couch and it worked awesome.
lol....You read my mind. I am not a fan of flames. I am also not a fan of leather, only on car seats. With that being said, to each his own!!! But I'll have to pass on this job.......
Man, a lot of harsh opinions. You might consider cleaning the plastic, making repairs with fiberglass and then painting with a flat or semi gloss black. It would probably look better than the vinyl. You can also use sheet metal and paint if you need full custom.
Man, a lot of harsh opinions. You might consider cleaning the plastic, making repairs with fiberglass and then painting with a flat or semi gloss black. It would probably look better than the vinyl. You can also use sheet metal and paint if you need full custom.
I did ask for thoughts...silly me
Did it and it looked like crap, I need new interior pieces, I like i personally I tried vinyl wrap on the pieces but it was to many sharp edges and it looked like a garbage bag
Funny thing is all these harsh opinions no one seems to have pics posted of their custom work or dont even have their car as their avatar. Any one can write a check for a car. where is the fun in that? So lets see them ladies.
Funny thing is all these harsh opinions no one seems to have pics posted of their custom work or dont even have their car as their avatar. Any one can write a check for a car. where is the fun in that? So lets see them ladies.
I agree! Good effort, it turned out a bit wavy though. I have tons of pix of custom stuff I've done on mine. It's tougher than it looks! Mine is a track car so I left the dash out and did a gauge pod instead.
Funny thing is all these harsh opinions no one seems to have pics posted of their custom work or dont even have their car as their avatar. Any one can write a check for a car. where is the fun in that? So lets see them ladies.
Shamdave, that topic has been discussed here few times. Do a search and you will find tires, wheels, paint, interior, engines, ground effects, engine bays, all black, all red, all white, etc; and many more.
Here is my interiors from 2006-July 2011
By the end of September they will be Carbon Fibered Paint. I'm considering a DIY, but I can't do certain angles with a spray paint can. This is the pattern I have in mind.
I think the pics dont really do it justice. It looks like the leather is dirty which i doubt it does, think its the dirt. As for craftsmanship its a little back yard but i like the ideas. I think it covers too much of the graphics and accent lines so ends up with a lot of empty space. Thats what im not digging about the whole package, but considering the alternative of beaten interior or paying 100 bucks per piece, good job. get us some pics out of direct sunlight, im betting it will look better.
Still like it though. Its definately new and a take ive never seen.
Shamdave, that topic has been discussed here few times. Do a search and you will find tires, wheels, paint, interior, engines, ground effects, engine bays, all black, all red, all white, etc; and many more.
Here is my interiors from 2006-July 2011
By the end of September they will be Carbon Fibered Paint. I'm considering a DIY, but I can't do certain angles with a spray paint can. This is the pattern I have in mind.
I like it I found some Vinyl wrap that carbon fiber but I would have a pro do it I tried with black and it is hard, the error process will break your bank, To have those pieces covered with black vinyl to match the out side of my car and it was $150.00 total. A little much for my taste.
I think the pics dont really do it justice. It looks like the leather is dirty which i doubt it does, think its the dirt. As for craftsmanship its a little back yard but i like the ideas. I think it covers too much of the graphics and accent lines so ends up with a lot of empty space. Thats what im not digging about the whole package, but considering the alternative of beaten interior or paying 100 bucks per piece, good job. get us some pics out of direct sunlight, im betting it will look better.
Still like it though. Its definately new and a take ive never seen.
Trust me, it's more then the camera.....Holly crap, thats really ugly.. No offence but, Damn.. ..I can see you put alot of work into your creation, but its time to realize what you have ,rip it out, and start over........And dice, you really put dice in your Corvette?????.You do want honest opinions right?....WW
PS...By the way, nice stereo..Got any John Denver CDs??..
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.