Help with ID on connector

Reply Subscribe

Thread Tools

Search this Thread

Dec 30, 2012 | 11:09 AM

Rocketvette89

Thread Starter

Racer

Joined: Dec 2006

Posts: 384

Likes: 0

From: Fort Pierce Florida

Help with ID on connector

This connector is on the dash wiring harness. Looks to be either in the center of the dash, or towards the drivers side of the dash. I would appreciate any help with putting an ID on this connector. This is for a 89 Vette.

Rocky

Last edited by Rocketvette89; Dec 30, 2012 at 04:34 PM. Reason: Add Photos

Dec 30, 2012 | 01:23 PM

WVZR-1

Team Owner

Joined: Sep 2003

Posts: 25,356

Likes: 2,729

How about a snapshot of the end view so the number of cavities and type of terminals that are used!

Dec 30, 2012 | 04:35 PM

Rocketvette89

Thread Starter

Racer

Joined: Dec 2006

Posts: 384

Likes: 0

From: Fort Pierce Florida

Quote:

Originally Posted by Rocketvette89

Rocky

Dec 30, 2012 | 05:22 PM

WVZR-1

Team Owner

Joined: Sep 2003

Posts: 25,356

Likes: 2,729

Does your car have C68 auto A/C? It really looks like it could be the connector for that. I would think that's a 10 place connector.

Dec 30, 2012 | 08:51 PM

Rocketvette89

Thread Starter

Racer

Joined: Dec 2006

Posts: 384

Likes: 0

From: Fort Pierce Florida

Quote:

Originally Posted by WVZR-1

Does your car have C68 auto A/C? It really looks like it could be the connector for that. I would think that's a 10 place connector.

Thanks much for responding.

I have a manual AC/Heater Control. The wiring harness if from a car with the electronic control AC/Heater control. I saw a photo of a electronic control, but only saw one connector, and this wasn't the one. The device must have a couple of connections.

I have only a couple of more connectors to ID, then I can put the dash back together.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump