Identify the part
Sep 5, 2013 | 10:33 PM
Thread Starter
Burning Brakes
Joined: May 2013
Posts: 768
Likes: 24
From: Valrico Florida
Identify the part
Item #27 According to the page these are Front Frame Cross Member?
How difficult to change these out with new ones, or pull the current and clean them up, mine are in rough shape (some corrosion)
Sep 5, 2013 | 10:51 PM
Thread Starter
Burning Brakes
Joined: May 2013
Posts: 768
Likes: 24
From: Valrico Florida
Nevermind. Wrong year in pic, that and I don't think that is what I am looking at, will take pictures tomorrow.
Sep 6, 2013 | 12:18 AM
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
If it is those diagonal braces, they are easy to get out, clean up and re-install.
Sep 6, 2013 | 12:50 AM
Race Director
Joined: May 2006
Posts: 10,691
Likes: 71
From: Phoenix Arizona
Quote:
Originally Posted by
GREGGPENN
If it is those diagonal braces, they are easy to get out, clean up and re-install.
The later ones mount the same, they are slightly larger.
Sep 6, 2013 | 02:15 AM
Le Mans Master
Joined: Sep 2009
Posts: 6,333
Likes: 1,143
From: Vermilion OH
yup, just light stamped steel bolted on to the front subframe assembly. should be able to remove them and wire wheel or sandblast and repaint and reinstall.
Sep 6, 2013 | 07:26 AM
Thread Starter
Burning Brakes
Joined: May 2013
Posts: 768
Likes: 24
From: Valrico Florida
Awesome news! Thanks for the info, it looked like that from under the car on the ground with limited visibility but I wasn't sure.
Identify the part
The later ones mount the same, they are slightly larger.
