Take two, c4 car audio
Thread Starter
Advanced
Joined: Apr 2014
Posts: 82
Likes: 0
From: Sacramento CA
Take two, c4 car audio
Now, for many of you, I understand this is not something up your guys alley. Look away if you're into making your car faster, I want my car to be a more pleasant place to be; it's my daily.
Anyways, this will interest the people who are into the sq tier of audio; not spl, I don't really care too much about that. I will be installing a 3 way component system up front in the car consisting of morel elate 9s, morel hybrid 4s, and morel supremo piccolo tweeters. Processing will either be done by an outboard dsp or pioneer p99rs, not there yet. I will also be redoing the trunk portion of my car probably this winter.
So, I'll just do a quick run down
Anyways, this will interest the people who are into the sq tier of audio; not spl, I don't really care too much about that. I will be installing a 3 way component system up front in the car consisting of morel elate 9s, morel hybrid 4s, and morel supremo piccolo tweeters. Processing will either be done by an outboard dsp or pioneer p99rs, not there yet. I will also be redoing the trunk portion of my car probably this winter.
So, I'll just do a quick run down
Thread Starter
Advanced
Joined: Apr 2014
Posts: 82
Likes: 0
From: Sacramento CA
So I started making the fiberglass enclosures for the 9s in the Door sills.
More over, the interior in my car needs serious tlc, so 2 birds 1 stone
This is the previous install with the morel elate 6s, looks like dog $ hit, but they did sound pretty good
This is a Mish mosh of left and right sides.
cut the sill panels and made the backsides of the enclosure to utilize as much air space as possible.
I'm pretty careful with the fiberglass so I don't really need to protect much
Mock up
Stretch fabric and fiberglass for shape
Fiberglass and ever coat mixtures after reinforcement with many layers of mat and resin, then final bondo.
Didn't really wanna do carpet, but it's the most durable and stock looking.
I'll try and get better pics later but that's it for now. Next will be the a pillar tweeter pods for these
More over, the interior in my car needs serious tlc, so 2 birds 1 stone
This is the previous install with the morel elate 6s, looks like dog $ hit, but they did sound pretty good
This is a Mish mosh of left and right sides.
cut the sill panels and made the backsides of the enclosure to utilize as much air space as possible.
I'm pretty careful with the fiberglass so I don't really need to protect much
Mock up
Stretch fabric and fiberglass for shape
Fiberglass and ever coat mixtures after reinforcement with many layers of mat and resin, then final bondo.
Didn't really wanna do carpet, but it's the most durable and stock looking.
I'll try and get better pics later but that's it for now. Next will be the a pillar tweeter pods for these
Thread Starter
Advanced
Joined: Apr 2014
Posts: 82
Likes: 0
From: Sacramento CA
Update
just finished the tweeter pods for my supremos
This is the passenger side finished in vinyl, it was a huge pita to wrap these btw to make sure there were no wrinkles. I'll get better pics once it stops raining
just finished the tweeter pods for my supremos
This is the passenger side finished in vinyl, it was a huge pita to wrap these btw to make sure there were no wrinkles. I'll get better pics once it stops raining
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
