How did this happen ?
Thread Starter
Team Owner
Joined: Dec 2012
Posts: 30,427
Likes: 1,609
From: Outside the Quick Stop N.J.
How did this happen ?
One headlight on my 89 Vert was getting stuck, so I figured it was time for bushings. Took everything apart only to find out the bushinge were fine, the assewmbly was getting hung up mechanically. I put everything back together and now everything works, BUT the light I removed runs opposite the other one. When the lights are on it closes, turn them off it opens. I did take the motor apart to check the internals, could I have switched the magnets and changed the polarity ? I guess I could just swap the wires in the plug to make it run correctly, but would like to avoid that. Any ideas ?
