shifter boot
Thread Starter
2nd Gear
Joined: Feb 2017
Posts: 2
Likes: 0
shifter boot
I'm puzzled. I can't seem to find a shifter boot to replace my old one that has a frame that matches the bolt pattern on my console. I did replace my console with an aftermarket one. Could that be the problem, because I haven't been able to find a good replacement gm console. Any suggestions?
Team Owner
Joined: May 2000
Posts: 53,720
Likes: 5,609
From: Plantation Florida USAF(Retired) 1966-1990
U.S. Air Force
St. Jude Donor '05 thru '26
NCM Sinkhole Donor
Your best shot, is to remove the boot, and bracket, and take it to upholstery shop to have made using your old boot has the sample.
When I replaced my C4 boot, pulled it off, and sent it out.
If you buy aftermarket, you only get the boot, and you need to assemble it yourself for installations.
When I replaced my C4 boot, pulled it off, and sent it out.
If you buy aftermarket, you only get the boot, and you need to assemble it yourself for installations.
Last edited by 1bdvet; Feb 24, 2018 at 02:38 PM.
