Question about side mirrors.
Jun 19, 2018 | 05:50 PM
Thread Starter
Melting Slicks
Joined: Nov 2013
Posts: 3,451
Likes: 336
From: Greater Cincinnati Area.
Question about side mirrors.
How do you remove them from the housing for paint?
Jun 19, 2018 | 07:07 PM
Melting Slicks
Joined: Jun 2005
Posts: 3,069
Likes: 83
From: Everyone needs something to believe in, I believe I'll have another beer. Wisconsin
As per f s m.
1. disconnect neg. battery cable
2.remove trim panel
3.remove water deflector (clear plastic sheet)
4.remove lower accessory mounting plate
5.mirror harness connectors and retainer
6.electrical connector
7.mirror retaining nuts
That should about do it.
Jun 19, 2018 | 07:13 PM
Le Mans Master
Joined: Jul 2004
Posts: 6,219
Likes: 696
From: Clifton Park, NY ............Clearwater, FL ... 85 Original Owner
Quote:
Originally Posted by
The Green Hornet
As per f s m.
1. disconnect neg. battery cable
2.remove trim panel
3.remove water deflector (clear plastic sheet)
4.remove lower accessory mounting plate
5.mirror harness connectors and retainer
6.electrical connector
7.mirror retaining nuts
That should about do it.
Why?
Jun 19, 2018 | 07:19 PM
Safety Car
Joined: Jun 2010
Posts: 4,564
Likes: 1,676
Quote:
Originally Posted by
Cruisinfanatic
Why?
Because the FSM doesn't want you to accidentally short something.
Jun 19, 2018 | 07:28 PM
Thread Starter
Melting Slicks
Joined: Nov 2013
Posts: 3,451
Likes: 336
From: Greater Cincinnati Area.
Thanks.. I appreciate the reply.
But I already have the mirror off the door. The door is painted and reinstalled.
Now I have the mirror and apparently no good way to remove the guts and paint the housing?
Ideas?
Jun 19, 2018 | 07:37 PM
Thread Starter
Melting Slicks
Joined: Nov 2013
Posts: 3,451
Likes: 336
From: Greater Cincinnati Area.
I guess I can use some forceps and just work around the glass..
Sure you be nice if they came out of there without too much hassle, though.
If one goes bad you just have to replace the whole mirror? I was looking at diagrams at Keens and some other places, and it sure looks like it.
Jun 19, 2018 | 08:22 PM
Drifting
Joined: Jan 2005
Posts: 1,348
Likes: 322
From: San Antonio Tx
The glass and backing snap in with a trunion. When I painted mine I just tilted the mirror all the way down so I could get my fingers behind it and pulled straight out. To reinstall it just snaps back in.
Jun 19, 2018 | 08:25 PM
Melting Slicks
Joined: Jun 2005
Posts: 3,069
Likes: 83
From: Everyone needs something to believe in, I believe I'll have another beer. Wisconsin
Get your fingers behind the mirror and pull, it just snaps into some tabs.
I know, your scared but that is how it's removed.
Last edited by The Green Hornet; Jun 19, 2018 at 08:27 PM .
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Jun 19, 2018 | 08:26 PM
Melting Slicks
Joined: Jun 2005
Posts: 3,069
Likes: 83
From: Everyone needs something to believe in, I believe I'll have another beer. Wisconsin
RWD beat me to it.
Jun 19, 2018 | 08:54 PM
Thread Starter
Melting Slicks
Joined: Nov 2013
Posts: 3,451
Likes: 336
From: Greater Cincinnati Area.
Thanks Guys!!
Appreciate it!
Jun 19, 2018 | 10:11 PM
Le Mans Master
Joined: Jul 2004
Posts: 6,219
Likes: 696
From: Clifton Park, NY ............Clearwater, FL ... 85 Original Owner
Quote:
Originally Posted by
ChumpVette
Because the FSM doesn't want you to accidentally short something.
By unplugging a couple connectors?
Jun 20, 2018 | 01:52 PM
Pro
Joined: Jan 2004
Posts: 676
Likes: 196
From: Chester SC
St. Jude Donor '15-'16, '21,'24
Quote:
Originally Posted by
RWDsmoke
The glass and backing snap in with a trunion. When I painted mine I just tilted the mirror all the way down so I could get my fingers behind it and pulled straight out. To reinstall it just snaps back in.
!!