Need blinker fluid?
Sep 25, 2018 | 01:24 PM
Thread Starter
Heel & Toe
Joined: Aug 2018
Posts: 18
Likes: 0
Need blinker fluid?
Ok seriously I know there's no such thing as blinker fluid but I do need help with my blinkers.......when I got the car when blinker work and one blinker stay. So I changed all four tail lights and my blinker fuse now my blinkers do not blinker at all whatsoever but they do get power to so I can push up on the direction I'm turning in the light Will stay on...... and I also thought it was strange that it didn't affect my hazards my hazards work properly
Sep 25, 2018 | 02:23 PM
Team Owner
Joined: Dec 1999
Posts: 34,873
Likes: 487
From: Lacey WA RVN 68-69
NCM Sinkhole Donor
Assume that one side (left or right) works and the other does not?? Could be a bad turn signal flasher. The hazards have their own flasher.
Sep 25, 2018 | 02:39 PM
Drifting
Joined: Apr 2014
Posts: 1,699
Likes: 231
From: Hawthorne CA
You only need blinker fluid if your car has piston return springs.
Sep 25, 2018 | 05:57 PM
Melting Slicks
Joined: May 2013
Posts: 2,692
Likes: 349
From: Sacramento California
I changed the air in my tires because fresh air is better. My turn signals are much brighter now.
Sep 25, 2018 | 07:26 PM
Le Mans Master
Joined: Oct 2004
Posts: 7,706
Likes: 485
From: Everett WA
C4 of Year Finalist (appearance mods) 2019
Quote:
Originally Posted by
AgentEran
You only need blinker fluid if your car has piston return springs.
I don't think that's totally correct. If for example you have an L98 with muffler bearings, then you will need the blinker fluid periodically.
Sep 25, 2018 | 07:28 PM
Instructor
Joined: Jul 2017
Posts: 138
Likes: 19
From: Fort Lauderdale FL
Changed my tail light bulbs and blinkers worked again. The next day they weren't. Was the front amber bulb this time. Check the bulbs again.
Sep 25, 2018 | 08:25 PM
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
If all bulbs are lit on steady with each the same brightness I'd replace the relay.
Sep 25, 2018 | 08:28 PM
Drifting
Joined: Apr 2014
Posts: 1,699
Likes: 231
From: Hawthorne CA
Quote:
Originally Posted by
Mr. Peabody
I don't think that's totally correct. If for example you have an L98 with muffler bearings, then you will need the blinker fluid periodically.
Ahh! How could I overlook such an obvious detail
Reminds me of when I once had a muffler bearing seize in the middle of a huge burnout.. blew everyones ear drums out.
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Sep 26, 2018 | 11:43 AM
Thread Starter
Heel & Toe
Joined: Aug 2018
Posts: 18
Likes: 0
Quote:
Originally Posted by
c4cruiser
Assume that one side (left or right) works and the other does not?? Could be a bad turn signal flasher. The hazards have their own flasher.
It's weird when I tried to Signal left or right the indicator stays green and the signal light I'm signaling stays on
Sep 26, 2018 | 11:47 AM
Thread Starter
Heel & Toe
Joined: Aug 2018
Posts: 18
Likes: 0
Quote:
Originally Posted by
RArline
Changed my tail light bulbs and blinkers worked again. The next day they weren't. Was the front amber bulb this time. Check the bulbs again.
got some new front signal lights going to change them n see if that works the wire inside seem to be attached and not blewn
Last edited by Cloud92; Sep 26, 2018 at 03:58 PM .
Reason: Miss spelled word
Sep 27, 2018 | 10:38 AM
Thread Starter
Heel & Toe
Joined: Aug 2018
Posts: 18
Likes: 0
***** getting weird......while not signaling......the green indicator arrow stays on