Oh SHT whats wrong with the LT4??
#21
Drifting
Thread Starter
https://www.summitracing.com/parts/TAY-84225
Part# 84225
Were a really good fit on the looms.. almost too big but a nice snug fit. I use zip ties as well as the looms just to be sure.
#22
Racer
I ordered this Taylor set from amazon:
They are pretty close to what AgentEran used except they are 8mm instead of 8.2mm. I believe the stock wires are 7mm so the 8mm replacements were really tight in the looms. I ended up doing headers later and they didn't work with the stock looms anyway so now I have custom zip tie wire looms...
They are pretty close to what AgentEran used except they are 8mm instead of 8.2mm. I believe the stock wires are 7mm so the 8mm replacements were really tight in the looms. I ended up doing headers later and they didn't work with the stock looms anyway so now I have custom zip tie wire looms...